Jump to content

2 Door Blazer 4 15s 4th Order Wall


Recommended Posts

What's up guys, been hanging around the forum for awhile and finally decided to make a build long. Old 2 18s wall did a 53.4 (best) but wasn't what I wanted so I went ahead and tore it down to build a 4th. 1.5 sealed per after displacement. Stripper pole in the ported section and all thread in the sealed section for bracing. Port will be in the center and be removable so I can access subs incase I need to.

Equipment:
4 DB Drive K9 15s

2 DD M2As (.25 each daily)

Rockford 4x6s and Rockford Pro audio mids too come (Infinity 4x6s and Dayton 6s in the doors currently)

Rockford P400.4

4 or 3 Deka group 31s in the rear

D3400 under the hood

Tenney 270 amp alt still holding on strong until it goes poof lulz

Ipad mini going in the dash

Dash bezel, door panels, pillars, and console have all been sanded smooth and painted.

Rockford 360.3 will be added also

Enough with the info on the gear. I'll post some pics of the truck.

20131116_171952_LLS_zps29aa1914.jpg

Old wall with two MT 18s on the M2As (12.5 cubes net,port wasn't big enough and was my first wall/150+ build)

IMG_20131109_145445_zps6643ac6a.jpg

Rear setup is the same except for the back of the wall (Rubi 2500s were on 2 Ab HDs and I had a Phoenix Gold 800.4) Don't mind the plastic piece hanging on the right it was fixed after lol

IMAG1092_zpserydum5x.jpg

20131203_191247_zps0pj6wzdi.jpg

20131210_104404_zpsh7y1wklp.jpg

IMG_20131207_142149_zpskmx1xu1c.jpg

20131210_120732_zpshdhkijan.jpg

20131210_125907_zpsbpfd31eo.jpg

IMG_20131219_125425_zpsc8fgpoyg.jpg

20131217_131956_zps0fpu3evt.jpg

IMG_20140103_161343_zpsjt86f187.jpg

20140111_171146_HDR_zpsk5ebnnit.jpg

IMG_20140120_151528_zpsp3n0yvic.jpg

Blurry pic with poor lighting the paint is red not pinkish

20140218_200501_zpsztqaaf6v.jpg

2001 Chevy Blazer. 6/7 drop (sits 6/8 due to audio in the rear). Envoy swap etc. 20" Ruff Racing 953s (sold them to buy new wheels again). Sonoma Hood. Too many details to list I'll post more pics of the interior when I find them

Wall is built besides the port and loading wall. Still needs to be sealed off from the rear but I will get to that when the rest is built. Everything is double baffled except the top,bottom, and part of the wheel well notches. 3/4" Birch ply. Angle iron was used to mount the sub baffles. Using more angle iron for bracing when the loading wall and port is built. Around a 2.2:1 ratio after port and loading wall. Kreg jig was used to build inside the truck. Wheel well notches 45ed with filler and all holes filled.

Link to comment
Share on other sites

  • Replies 87
  • Created
  • Last Reply

No my truck was not leaking anything lol. Parked for Pandemonium Car Show in New Orleans

IMAG1200_zps12a772e4.jpg

Red is duplicolor rattle can from when I did it 4 years ago when I was 16. All the black was done with a gun. Will be shooting all the red pieces when the dash bezel is done. Still need to wetsand and buff the black pieces also

IMAG1248_zpsc7e5d553.jpg

Link to comment
Share on other sites

Thanks Kylar. Once I added the audio the cnotch wasn't enough and the driveshaft started to rub the crossmember so that was notched also lol

Link to comment
Share on other sites

Video I shot a few months ago.


Posted up in my shop. ;)
20131022_163757_RichtoneHDR_zps363c9d2e.



Dude likes red so much, he even made his lady dye her hair red.
20131210_190112_zpsauctc4ul.jpg

TEAM SOUTH Bassahaulic Productions

The ONLY Bright Atlantic Blue DiamondBoxx L

Drew Jones
Bassahaulic Productions

4 SSA ZCON 15"s
2 Sundown SCV-6000's
6 AGM G31's

161.6 @ 40Hz Outlaw
159.8 @ 36Hz Legal
 

┌∩┐(◣_◢)┌∩┐

Link to comment
Share on other sites

she is puuuuuuuurty

The truck or his lady? lol

TEAM SOUTH Bassahaulic Productions

The ONLY Bright Atlantic Blue DiamondBoxx L

Drew Jones
Bassahaulic Productions

4 SSA ZCON 15"s
2 Sundown SCV-6000's
6 AGM G31's

161.6 @ 40Hz Outlaw
159.8 @ 36Hz Legal
 

┌∩┐(◣_◢)┌∩┐

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.




×
×
  • Create New...