harlemn8ive Posted April 6, 2014 Report Share Posted April 6, 2014 Its me again the super noob had a question: I finally got my new car( well new to me) I wanna start my first build and i wanna be adventurous. I have purchase 3 sets of sound qubed pro audio mids and super tweeter which i will put in the doors( or maybe 2 sets in the door and 1 set in the kick panels). is i plan to fiberglass the doors lucky for me i have a junk car that is the same exact car. the issue is these door panels have a pocket you ca actually open up. what would be the best way fiberglass the doors for door pods cut into the plastic? remove the pocket and build the pods? here are a few pics to give you an idea: thanks in advance any input would be highly appreciated Check out my build slow but... slow and steady wins the race http://www.stevemeadedesigns.com/board/topic/185561-1st-build-budget-toyota-mark-2/ Link to comment Share on other sites More sharing options...
ModFreak Posted April 6, 2014 Report Share Posted April 6, 2014 I would cut out factory speaker location and remove the pocket, glass entire lower half with 2 mids and 1 tweet Link to comment Share on other sites More sharing options...
mbdblue Posted April 6, 2014 Report Share Posted April 6, 2014 It's really up to you and how you want to design it. you can either remove the pocket and build off of the bottom half, or build a pod around it. I don't know why, but I like those pockets.....unfortunately, with 2 mids, it'll probably be too difficult to build around it. AA-Atomic-Clif Designs-DC-Diamond-Digital Designs-Directed-Eclipse-Fi-Hertz-Hifonics-Kenwood-Memphis-Phoenix Gold-Pioneer-PPI-PSi-Stinger-Sundown-TC Sounds-Viper-Zapco Link to comment Share on other sites More sharing options...
harlemn8ive Posted April 6, 2014 Author Report Share Posted April 6, 2014 Ok... Really excited about this build applying all the things I have learned from this forum shall be a journey Check out my build slow but... slow and steady wins the race http://www.stevemeadedesigns.com/board/topic/185561-1st-build-budget-toyota-mark-2/ Link to comment Share on other sites More sharing options...
rockFord_Expedition Posted April 6, 2014 Report Share Posted April 6, 2014 Get it bro Old School/New School RF Build March 2015 SOTM Winner How to crimp large wire Link to comment Share on other sites More sharing options...
harlemn8ive Posted April 6, 2014 Author Report Share Posted April 6, 2014 It's really up to you and how you want to design it. you can either remove the pocket and build off of the bottom half, or build a pod around it. I don't know why, but I like those pockets.....unfortunately, with 2 mids, it'll probably be too difficult to build around it. They are kind of deep but just worred about the security of them leaning toward taking the pocket off but I know this means more fabrication on my part Check out my build slow but... slow and steady wins the race http://www.stevemeadedesigns.com/board/topic/185561-1st-build-budget-toyota-mark-2/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.