gckless Posted July 18, 2014 Report Posted July 18, 2014 Test the RCAs going into your amp. "Clipping" is the biggest forum boner now. It's like witchcraft... it automatically explains just about everything people don't understand. My build log: http://www.stevemeadedesigns.com/board/topic/200295-gckless-2011-chevrolet-impala/ High resolution photos: Gilbert Kless Photography
adreano17 Posted July 18, 2014 Author Report Posted July 18, 2014 I just ordered a new headunit and gonna try it out. The preout for the factory radio are to be at 1v at 40/40 volume (does not clip btw). I'm getting .03 vac in two channels at 40/40. By the time it gets to 30/40, no voltage registers at all at the preamp. If it does it's below .1 Pioneer AVH-p5700DVD | MB Quart Onyx ONX4.125 | 6.5 Alpine Type-S component & 6x9 3-way | Hifonics Brutus brz1700.1d | 2 - 12" Kicker L7 | Custom box tuned to 36 hz | 220A Mechman Alternator | 1/0 OFC Welding all the way back | Big 3 | 2 Farad Tsunami Cap | Deka 9a34 | 20% Tint | 6000K HIDs | Yellow Projector Fogs | Dual Out Magnaflow
adreano17 Posted July 18, 2014 Author Report Posted July 18, 2014 RCA are about 1.7 going to the aftermarket amp. But only at 40/40. The two channels that I stated in my last post will not produce any voltage when at 30/40 Pioneer AVH-p5700DVD | MB Quart Onyx ONX4.125 | 6.5 Alpine Type-S component & 6x9 3-way | Hifonics Brutus brz1700.1d | 2 - 12" Kicker L7 | Custom box tuned to 36 hz | 220A Mechman Alternator | 1/0 OFC Welding all the way back | Big 3 | 2 Farad Tsunami Cap | Deka 9a34 | 20% Tint | 6000K HIDs | Yellow Projector Fogs | Dual Out Magnaflow
Recommended Posts
Archived
This topic is now archived and is closed to further replies.