RooTxBeeR Posted December 3, 2014 Report Share Posted December 3, 2014 So I have been getting this at complete random since the day I built my computer. Literaly, at complete random. Playing games, when a video loads off facebook. Walk out of my room, come back in and it's bsod while idling. Literally, at random. I have been looking around and most of what I see is about temp's on hardware. Now I have temp readers and when this happens, I am at decent temperatures. I am not running super hot or anything. I have pushed my stuff to it's limits before with certain games and never had this crash before. The top reads "The system encountered an uncorrectable hardware error." While the code is always 0x000000124 (0x0000000000000000, 0xfffffa801"this part changes from crash to crash", 0x00000000BF8/FF8000000, 0000000000000124). The 3rd paramater is always either FF8 or BF8 inbetween the 0's. I have used a blue screen viewer to try and gain information on it, and literally it brings up a blank. Just shows me what the BSOD already displayed, doesn't show anything else as far as a cause to an address or something. Any help would be appreciated. Like I said, complete random. I have had times with a week and no crash, and other times where I have 8 in 2 days. I have had 3 more tonight, and the all show the same exact thing. hal.dll is the driver casuing it itht he address of hal.dll+12903 and a crash address of ntoskrnl.exe+70700. I have googled these to get no answer to my problem. People say they did fresh install, I have done 3 since I got this thing and it didn't fix it. On 11/20/2012 at 8:54 PM, AMI CUSTOMS said: Turned mine up today at a light, guy next to me his steering wheel started moving and he looked over at me like I was a magician lol. On 5/9/2012 at 8:45 PM, skittlesRgood said: fuck the plating. look at what the main metal used is. you could buy unicorn blood plated terminals but if its just covering up dog shit, whats the point On 4/10/2013 at 12:26 PM, mrd6 said: I'll admit, half way through sanding that fiberglass in the rain and cold while I was all itchy I was definitely starting to question why i was doing this haha Soon To Be '04 Ford Escape US Alternator 280A Hairpin D4800 Under the Hood (6) XP3000's in Rear 1/0 SHCA & XS Power 4 runs to back TORK2 kit from Tony @ CE Auto Supply Pioneer DEH-80PRS DD AW6.5 (2) per door *Tweeter Unkown* DD SS4a & C3d (2) SCV4000 @ .5Ohm (2) 15" Sundown Zv5 Link to comment Share on other sites More sharing options...
RooTxBeeR Posted December 4, 2014 Author Report Share Posted December 4, 2014 Anybody? Just got another while loading up a game, all normal temps. On 11/20/2012 at 8:54 PM, AMI CUSTOMS said: Turned mine up today at a light, guy next to me his steering wheel started moving and he looked over at me like I was a magician lol. On 5/9/2012 at 8:45 PM, skittlesRgood said: fuck the plating. look at what the main metal used is. you could buy unicorn blood plated terminals but if its just covering up dog shit, whats the point On 4/10/2013 at 12:26 PM, mrd6 said: I'll admit, half way through sanding that fiberglass in the rain and cold while I was all itchy I was definitely starting to question why i was doing this haha Soon To Be '04 Ford Escape US Alternator 280A Hairpin D4800 Under the Hood (6) XP3000's in Rear 1/0 SHCA & XS Power 4 runs to back TORK2 kit from Tony @ CE Auto Supply Pioneer DEH-80PRS DD AW6.5 (2) per door *Tweeter Unkown* DD SS4a & C3d (2) SCV4000 @ .5Ohm (2) 15" Sundown Zv5 Link to comment Share on other sites More sharing options...
CstrokerV Posted December 4, 2014 Report Share Posted December 4, 2014 you could try to look at the error logs and see what it says my build http://www.stevemeadedesigns.com/board/topic/142505-small-build-log-4-dc-lvl3-10s-tl-update-link-to-rebuild/ http://www.stevemeadedesigns.com/board/topic/154258-rebuild-6-lvl3-12s-update-small-video-nothing-spectacular/ new build http://www.stevemeadedesigns.com/board/topic/188181-03-trailblazer-slow-build-8-dc-lvl3-12-m1-motor-m2-parts/ Link to comment Share on other sites More sharing options...
RooTxBeeR Posted December 4, 2014 Author Report Share Posted December 4, 2014 you could try to look at the error logs and see what it says I tried to before but I guess i was just brain dead because I couldn't figure it out. Every one that I find it says its coming from the processor core, so what does that mean? My cpu dieing? I mean I understand a core is crashing and it shuts the computer down. But why? On 11/20/2012 at 8:54 PM, AMI CUSTOMS said: Turned mine up today at a light, guy next to me his steering wheel started moving and he looked over at me like I was a magician lol. On 5/9/2012 at 8:45 PM, skittlesRgood said: fuck the plating. look at what the main metal used is. you could buy unicorn blood plated terminals but if its just covering up dog shit, whats the point On 4/10/2013 at 12:26 PM, mrd6 said: I'll admit, half way through sanding that fiberglass in the rain and cold while I was all itchy I was definitely starting to question why i was doing this haha Soon To Be '04 Ford Escape US Alternator 280A Hairpin D4800 Under the Hood (6) XP3000's in Rear 1/0 SHCA & XS Power 4 runs to back TORK2 kit from Tony @ CE Auto Supply Pioneer DEH-80PRS DD AW6.5 (2) per door *Tweeter Unkown* DD SS4a & C3d (2) SCV4000 @ .5Ohm (2) 15" Sundown Zv5 Link to comment Share on other sites More sharing options...
Maxim Posted December 4, 2014 Report Share Posted December 4, 2014 Is your computer overclocked at all? It could be either an overclock you set or an automatic overclock by the motherboard that is causing the issue. wtf is lolcats? I'd def get a fat hooker if i had to resort to that kinda thing. I feel like they'd be grateful and work harder. Also its more bang for my buck, more real estate for my dollar if you catch my drift. its like the Costco of streetwalkers. I was hoping for 150 . I was hoping she would let me put it in her butt Link to comment Share on other sites More sharing options...
TheTubeAmper Posted December 4, 2014 Report Share Posted December 4, 2014 How long has it been since the computer was built? Give us some specs, and also, how up-to-date are your drivers? PS: I'm new to the forum but have been fixing comptuers both as a hobby, as well as at my job for about 6 years. 96 Mazda Protege LX 1.5L Electrical: Ebay 140A HO Alt - RIP 1/5/2016 XS-Power D5100R All SHCA power & speaker wire (oversized 4GA OFC power wire) 3x Sets 20' Rockford Fosgate RCA's Audio: 2x Sundown Audio SA-10 v2's in sundowns recommended ported box. Rockford Fosgate P1000.1 @ 1ohm Rockford Fosgate P1692's in rear deck Rockford Fosgate P165-S's in front doors Rockford Fosgate P400.4 Clarion CZ-702 Headunit Link to comment Share on other sites More sharing options...
RooTxBeeR Posted December 4, 2014 Author Report Share Posted December 4, 2014 Is your computer overclocked at all? It could be either an overclock you set or an automatic overclock by the motherboard that is causing the issue. No it is not. I do have the ASUS AI suite installed but I have not changed any settings in bios or through the AI Suite. How long has it been since the computer was built? Give us some specs, and also, how up-to-date are your drivers? PS: I'm new to the forum but have been fixing comptuers both as a hobby, as well as at my job for about 6 years. A few months ago, 5 months at tops. Intel Core i7-4770K 3.5GHz Quad-Core Processor Cooler Master Hyper 212 EVO 82.9 CFM Sleeve Bearing CPU Cooler Asus Maximus VI Extreme ATX LGA1150 Crucial Ballistix Tactical 32GB (4 x 8GB) DDR3-1600 Memory Samsung 840 EVO 250GB 2.5" Solid State Disk Western Digital Caviar Black 2TB 3.5" 7200RPM Internal Hard Drive Gigabyte Radeon R9 290 4GB Video Card x2 Antec 1300W 80+ Platinum Certified Fully-Modular ATX Power Supply On 11/20/2012 at 8:54 PM, AMI CUSTOMS said: Turned mine up today at a light, guy next to me his steering wheel started moving and he looked over at me like I was a magician lol. On 5/9/2012 at 8:45 PM, skittlesRgood said: fuck the plating. look at what the main metal used is. you could buy unicorn blood plated terminals but if its just covering up dog shit, whats the point On 4/10/2013 at 12:26 PM, mrd6 said: I'll admit, half way through sanding that fiberglass in the rain and cold while I was all itchy I was definitely starting to question why i was doing this haha Soon To Be '04 Ford Escape US Alternator 280A Hairpin D4800 Under the Hood (6) XP3000's in Rear 1/0 SHCA & XS Power 4 runs to back TORK2 kit from Tony @ CE Auto Supply Pioneer DEH-80PRS DD AW6.5 (2) per door *Tweeter Unkown* DD SS4a & C3d (2) SCV4000 @ .5Ohm (2) 15" Sundown Zv5 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.