Patrick Saxon Posted January 14, 2015 Report Posted January 14, 2015 i plan to inverted my subs so i see those beasty magnets can i remove the trim ring and flip it to create a nice flush mounting surface or should i just remove it completely Quote
MrSkippyJ Posted January 14, 2015 Report Posted January 14, 2015 The rubber gasket? Quote F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69
Patrick Saxon Posted January 14, 2015 Author Report Posted January 14, 2015 Yes the rubber gasket Quote
MrSkippyJ Posted January 14, 2015 Report Posted January 14, 2015 I would leave it on, it's not just for looks, it helps seal the sub. Just use a double baffle and cut the 2nd baffle hole to the putter dimension of the sub. Quote F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69
will77530 Posted January 14, 2015 Report Posted January 14, 2015 You will need to cut a groove around the sub cut out for the lip of the frame to sit in as done in this photo Quote
will77530 Posted January 14, 2015 Report Posted January 14, 2015 do not remove the gasket there is no need Quote
Pioneerchuck Posted January 14, 2015 Report Posted January 14, 2015 Yeah I had my 2 XL 10s inverted in my F150 and I just left that gasket on and it worked like it should. It also gave me a nice armrest that was shiny and sexy. Lol Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.