im45pl Posted March 9, 2015 Author Report Posted March 9, 2015 thanks mate TEAM DC AUSTRALIA My_Build_Log
im45pl Posted March 15, 2015 Author Report Posted March 15, 2015 ok so i cant get the roof on without help by the look of it so i ran the speaker wires and put the floor in instead. im going to work on the doors for a while until i suck somebody in to helping out for an hour or so.... just some pics and i have finally made my decision for the front stage which will consist of 4 pairs of dual midbass gladen components and 4 x 8 inch crescendos, im going to try and keep the 8 inch in a separate enclosure in the doors, it will be ran semi active off the bit one cheers TEAM DC AUSTRALIA My_Build_Log
poorfish88 Posted April 5, 2015 Report Posted April 5, 2015 Checking out your progress, and all I can say is WOW! Big Dog is off the chain. Thing is going to be nasty.
low.n.louddd Posted April 6, 2015 Report Posted April 6, 2015 lookin great bro Got something in the works for myself... Stay tuned Previous personal builds (3) Fi Sp4 15" 6th 3 Fi sp4 15s, 6th, TFE 8.0. wind.... (6) Fi Sp4 18" DA Burban, 6 Fi Sp4 18s, plexiglass, LEDs, launched windshield on 2500 rms clamped lolz. etc (2) DC level 6 18s 2 Dc Level 6 18s in a civic hatch, NO WALL, my first big pretty build... Builds Ive done for folks: Dannys Van 12 Crossfire XSV4 18"s, 12 Crossfire 8xs, 48 XS Power d1600s, 165.5 SB4 2016 Champ Bobbys Yukon (new and old build) 4 B2 21"s in a 6th, plexiglass, LEDs, LOWSSSSS4 SSA Evil 18s, WIND WIND WIND Jacobs Silverado 2 CT Sounds EXO 15s, 6th order bandpass blowtrough Tonys Burban 6 HDC3 15s, colormatched standard ported, plexiglass, LEDs... etc Sauls Duramax 2 Sundown ZV4 18"s, 4th order blowthrough, plexiglass, LEDs, etc.. Jays Avalanche 2 DC Level 6 18s "blowthrough" plexiglass, LEDs, etc.. Codys Tahoe 4 Tantric SHD 18s, 4th, Ampere TFE 8.0, plexiglass LEDs n shiet Joes G35 4 Sundown SA 12s rammed in a g35 trunk, plexiglass, LEDs, the usual Ericks Lincoln 2 Sundown Zv4 12"s, 4th order trunk bandpass, wood grain, LEDs, etc..
im45pl Posted April 6, 2015 Author Report Posted April 6, 2015 Thanks guys, I have got more mdf now but the weather has been shit house the week or so it is supposed to clear up this week so hopefully updates will start again TEAM DC AUSTRALIA My_Build_Log
Guest Posted April 6, 2015 Report Posted April 6, 2015 nice work I wish I was on your level why no deadener on the floor tho?
im45pl Posted April 6, 2015 Author Report Posted April 6, 2015 nice work I wish I was on your levelwhy no deadener on the floor tho?[/quote Didn't seem necessary, steel welded to floor and expanding foam between the floor and box, oh and thanks mate TEAM DC AUSTRALIA My_Build_Log
im45pl Posted May 24, 2015 Author Report Posted May 24, 2015 so it looks like i have forgot to update part of this, i havent got any where near as far as i wanted too due to crappy weather and the fact i have to work outside for this build... anyway here are some pics of the baffles and i will get some more of the box and post them up later on so they are glued and screwed but still need to be sanded painted and also i need to work out the best bracing options. they are only 4 layers think but will be braced quite heavily... i love the way the pine frame made cutting full sheets so much easier, it is just clamped to the table below but makes for a great work platform one of the baffles and the other baffle and wondering why the vacuum cleaner wasnt cleaning lol and the stack of circles, gotta say the UCC router bit works awesome TEAM DC AUSTRALIA My_Build_Log
im45pl Posted May 24, 2015 Author Report Posted May 24, 2015 and the pics of the inside the box, excuse the mess its a bit of a dumping ground at the moment TEAM DC AUSTRALIA My_Build_Log
Recommended Posts
Archived
This topic is now archived and is closed to further replies.