hoit Posted March 4, 2015 Report Share Posted March 4, 2015 so...took a minute to look around here and on the web to take a look at some pics of custom door panels without power windows...and am really not getting any ideas. anyone care to share pics of custom door panels with speakers without power windows? or locks for my matter? just trying to get some ideas on how i can glass my doors. thanks in advance. 2007 Chevy Aveo Ls sedan 2 Sundown Xv2 on scv4k @ .5 ohm 2 pair RE XXX 6.5 components on sax200.4 @ 2 ohm Big Three, Three runs 1/0 power from front to back, 1 ground front to back Two runs ground from rear bank to chassis XS power d3100 upfront, 3 Odyssey 2150s in bank Singer 220 amp alt Link to comment Share on other sites More sharing options...
SIDE SHOW Posted March 4, 2015 Report Share Posted March 4, 2015 were abouts is the window winder mounted? the higher in the door the better Link to comment Share on other sites More sharing options...
Junior Pro Posted March 4, 2015 Report Share Posted March 4, 2015 I didn't have power windows in my Civic and I got a universal power windows when I built my door panels Link to comment Share on other sites More sharing options...
hoit Posted March 4, 2015 Author Report Share Posted March 4, 2015 it's going to be a glass job, no doubt. i'm contemplating the tweeter and 3'' in the a-pillar, and the 6.5 in the door. i've never glassed...so i'm a bit hesitant...but i'll probably mount the 6.5 in the oem location 2007 Chevy Aveo Ls sedan 2 Sundown Xv2 on scv4k @ .5 ohm 2 pair RE XXX 6.5 components on sax200.4 @ 2 ohm Big Three, Three runs 1/0 power from front to back, 1 ground front to back Two runs ground from rear bank to chassis XS power d3100 upfront, 3 Odyssey 2150s in bank Singer 220 amp alt Link to comment Share on other sites More sharing options...
hoit Posted March 4, 2015 Author Report Share Posted March 4, 2015 it's going to be a glass job, no doubt. i'm contemplating the tweeter and 3'' in the a-pillar, and the 6.5 in the door. i've never glassed...so i'm a bit hesitant...but i'll probably mount the 6.5 in the oem location. i'm trying to get a pic up now. 2007 Chevy Aveo Ls sedan 2 Sundown Xv2 on scv4k @ .5 ohm 2 pair RE XXX 6.5 components on sax200.4 @ 2 ohm Big Three, Three runs 1/0 power from front to back, 1 ground front to back Two runs ground from rear bank to chassis XS power d3100 upfront, 3 Odyssey 2150s in bank Singer 220 amp alt Link to comment Share on other sites More sharing options...
islandpride684 Posted March 4, 2015 Report Share Posted March 4, 2015 shoot i just replaced my passenger side universal window motor and i should have taken pics, but Ill snap a quick pic in the am off how my doors look with 1x tweet, 1x 6.5, and 1x 5 1/4, my controls are in the center console...all my windows and locks were manual so i added auto locks and auto windows also... Door panel Switches Build Log http://www.stevemeadedesigns.com/board/topic/186921-blk9te-07-yukon-slo-mo-build/page-3?hl=%2Bblk9te#entry2881410 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.