aculous Posted April 29, 2015 Author Report Share Posted April 29, 2015 Was trying to get it down to 2 ports instead of 3. it cut off the dimensions, 16x12x20 for a gross of 1.63 Link to comment Share on other sites More sharing options...
Triticum Agricolam Posted April 30, 2015 Report Share Posted April 30, 2015 I'd be worried that two 3" ports wouldn't be enough port area. Three should be good though. "Nothing prevents people from knowing the truth more than the belief they already know it.""Making bass is easy, making music is the hard part."Builds: Link to comment Share on other sites More sharing options...
aculous Posted April 30, 2015 Author Report Share Posted April 30, 2015 I'd be worried that two 3" ports wouldn't be enough port area. Three should be good though. Alright, just having a hard time figuring out how I am going to fit 3, 3" ports in there and running a tuning of 35-36. Minimum port length I can get in a 1.63cu ft box is 40inch port. And as I read the instructions for the worksheet thats PER PORT right? Gonna try and build it in sketchup and see if I can even fit three ports with bends in a 1.63 box with my subs in there too Link to comment Share on other sites More sharing options...
Joe X Posted April 30, 2015 Report Share Posted April 30, 2015 Unless you have a serious space problem I would recommend going with a slot port with 18+ square inches of cross-sectional area. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.