Jump to content

Garage Sale.....RF, Knu, Alpine, Image Dynamic and more


Recommended Posts

Trying to clear some clutter so here we go with round two of gear for sale. If you have any questions feel free to let me know. Everything is located in Minnesota and I will ship what I can via USPS flat rate, otherwise if that doesn't work I will try to find the most reasonable shipping method for whatever is purchased. I have sold on here with perfect feedback.

Product: 50 Ft of Knu Konceptz Kolossus Fleks 5145 strand OFC wire

Price: $150 shipped

Description: Brand new. Uncut 50 ft section

Knu_zpszilv0z57.jpg

Product: Image Dynamic ID8v3 D2

Price: $80 shipped

Description: If memory serves me correctly I purchased this from Pitbullx a long while ago, but have never powered it. Was going to be used in a project of mine, but never panned out. Coils are great.

Condition: 10/10

Cosmetics: 8/10 it was used and mounted....has a gasket on the underside of basket that was a little beat up.

ID8_zps1reuqsm9.jpg

ID8_zps1reuqsm9.jpg

Product: Rockford Fosgate 3Sixty.3

Price: $400 Shipped

Description: Brand new in factory sealed plastic still. Purchased from SPL2K on here a while ago but never used it. He researched this one and confirmed it has the proper wire in it not the ones people were having issues with as well.

Condition: 10/10

Cosmetics: 10/10

360.3_zpsaaycokv2.jpg

Product: Rockford Fosgate T162S 6.5" Neodymium Component Set

Price: $200 shipped

Description: Brand new. Never powered up. Been sitting on my shelf for a few years since I purchased them and never got around to using them.

Condition: 10/10

Cosmetics: 10/10

T165S_zpspbaypgaa.jpg

T156S%202_zpsgp6p6gbx.jpg

Product: Rockford Fosgate T152S 5.25" Neodymium Component Set

Price: $120 Shipped

Description: Never powered. One of the grills came busted, but when you mount it you will never know as it snaps into place. The grills were used for some moch up doing some fiberglassing and one has some glass on it that should come off with a little acetone and elbow grease. But functionally these are perfect.

Condition: 10/10 (in terms of functionality)

Cosmetics: 8/10 (the broken grill is easily hidden when mounted and the fiberglass resin is on the edge so it will either be out of sight, or a little clean up and it will be gone.

T152S_zpsh7lhqs5q.jpg

The broken grill:

T152S%20Grill_zpstfi6ns0b.jpg

The spot of resin:

T152S%20Grill%202_zps4h2tnxyb.jpg

Product: Alpine PDX5 5 channel amp

Price: $260 shipped

Description: I purchased this from skittlesrgood on here a while ago. I used it in my daily for a few months. Set the gains with the DD1 and xovers with the CC1....was never abused. All the mounting hardware and speaker terminal clips are there. Was a fantastic amp for it's small footprint. Powered 2 infinity component sets and an SA8 with no issues!

Condition: 10/10

Cosmetics: 9/10 (solely based on the fact it was used. Otherwise it still looks great.)

PDX5_zpsfo1cxmqq.jpg

PDX5%202_zpskeugoidm.jpg

Product: TKO Black 7.2" BH-736DSV LCD Visor Monitors

Price: $175 shipped

Description: Brand new. Factory plastic still covering the screen.

Condition: 10/10

Cosmetics: 10/10

7.2%202_zps7n4gqspd.jpg

7.2_zps3e6nlj9j.jpg

Product: (2) TKO 10.4" Flipdown BH-1052M Monitors

Price: $140 ea. (willing to work out slight deal if you want both)

Description: Brand new. Factory plastic still on screen. They have dome lights, remotes, swivel 180 degrees, 2 video inputs, etc.

Condition: 10/10

Cosmetics: 10/10

10.4_zpskijgfjfe.jpg

10.4%203_zps57fyr3ac.jpg

10.4%202_zpsq1ygwhee.jpg

I think that is about it for now. Possibly more to come. I have a BUNCH of random Knu 4 gauge I might let go for next to nothing if your are interested. I can get more pics of anything if wanted. As with most anything on here prices are OBO.....but I am in no rush to sell and don't need to do the whole "crackhead" prices at this time! :)

Firm believer in letting my cars do my talking!

You can't rush quality, it doesn't happen overnight. Quality takes time and dedication, but the end results more than pay for it.

"Black Pearl" Build Thread

http://www.stevemeadedesigns.com/board/topic/67183-1985-buick-regal-limited-build-log/page-1

Link to comment
Share on other sites

It would appear I accidentally put the same pic twice on the sub. Here is the pic of the other coil on it:

ID8%202_zpszxjntiek.jpg

Firm believer in letting my cars do my talking!

You can't rush quality, it doesn't happen overnight. Quality takes time and dedication, but the end results more than pay for it.

"Black Pearl" Build Thread

http://www.stevemeadedesigns.com/board/topic/67183-1985-buick-regal-limited-build-log/page-1

Link to comment
Share on other sites

Knu 1/0 power wire is SOLD! Let's get some of this other stuff gone! :D

Firm believer in letting my cars do my talking!

You can't rush quality, it doesn't happen overnight. Quality takes time and dedication, but the end results more than pay for it.

"Black Pearl" Build Thread

http://www.stevemeadedesigns.com/board/topic/67183-1985-buick-regal-limited-build-log/page-1

Link to comment
Share on other sites

Its all ofc knu 4 ga. I can grab lengths for you this weekend!

Firm believer in letting my cars do my talking!

You can't rush quality, it doesn't happen overnight. Quality takes time and dedication, but the end results more than pay for it.

"Black Pearl" Build Thread

http://www.stevemeadedesigns.com/board/topic/67183-1985-buick-regal-limited-build-log/page-1

Link to comment
Share on other sites

As mentioned the 1/0 knu wire is sold and shipped, let's get some of this other stuff sold and it will ship out Monday afternoon!

Firm believer in letting my cars do my talking!

You can't rush quality, it doesn't happen overnight. Quality takes time and dedication, but the end results more than pay for it.

"Black Pearl" Build Thread

http://www.stevemeadedesigns.com/board/topic/67183-1985-buick-regal-limited-build-log/page-1

Link to comment
Share on other sites

cutty...

i just posted this on my FB pages....mainly because you have some great brands and i like that you took the time to explain everythings condition and where you got it from, as well as still having some of the original boxes.

good luck on your sale, sucks you gotta give that stuff up though!


All SMD products + MORE available at my store here! https://wccaraudio.com/ 
wc2022-red-black-whitebg_1667625898__08138.original.png.02e514af82dce531edf1aa4a36851c60.png

Subscribe to My Youtube Channel! Over 1,000,000 subscribers strong! Turn on your notifications!
http://www.youtube.com/meade916

 

Follow My Instagram! Daily live feeds from the shop, exclusive content way before it hits my Youtube channel...and little squares with photo's in them :D
http://www.instagram.com/meade916

The Official SMD Facebook fan Page
https://www.facebook.com/SteveMeadeDesigns/

Follow my Tweet (Twitter)
http://www.Twitter.com/meade916
 

 

 

Link to comment
Share on other sites

Thanks! Much appreciated! Hopefully cleaning out storage will make some room for the next projects! Lol

Firm believer in letting my cars do my talking!

You can't rush quality, it doesn't happen overnight. Quality takes time and dedication, but the end results more than pay for it.

"Black Pearl" Build Thread

http://www.stevemeadedesigns.com/board/topic/67183-1985-buick-regal-limited-build-log/page-1

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Who's Online   0 Members, 0 Anonymous, 332 Guests (See full list)

    • There are no registered users currently online
×
×
  • Create New...