_paralyzed_ Posted June 19, 2015 Report Share Posted June 19, 2015 Ah, I see what you're saying. I miscalculated.Just fudge things to fit the best you can and fill in the gaps. Link to comment Share on other sites More sharing options...
David Stone Posted June 19, 2015 Author Report Share Posted June 19, 2015 So what I am saying is I am going to swap how the sides fit into the top and recalculate everything else based on that. All dimensions should remain the same and I will brace for the extra weight of the baffles due to the subs facing up. Link to comment Share on other sites More sharing options...
_paralyzed_ Posted June 19, 2015 Report Share Posted June 19, 2015 Perfect. Link to comment Share on other sites More sharing options...
David Stone Posted June 19, 2015 Author Report Share Posted June 19, 2015 Thanks again for the feedback. Link to comment Share on other sites More sharing options...
David Stone Posted June 22, 2015 Author Report Share Posted June 22, 2015 So I got the box built and I am going to pick up some carpet. Since it is so large I am only going to cover the side towards the front of the truck and the top where the subs are. Which side of the truck would you guys have the port? Driver or passenger side? I was thinking passenger side. I took pics of the whole build and will post them once I am done. I went with a single baffle but I used two 2x2 to hold up the mdf in between the subs and one 2x2 across the box. I should be pretty sturdy. I also gorilla glued clamped every board and then counter sunk and used 1.5 drywall screws around every 3-4 inches. Then I caulked around the entire inside as well. Link to comment Share on other sites More sharing options...
David Stone Posted June 22, 2015 Author Report Share Posted June 22, 2015 I still need to get the subs as well BTW. Link to comment Share on other sites More sharing options...
_paralyzed_ Posted June 22, 2015 Report Share Posted June 22, 2015 Try the port on both sides. Every box/vehicle combo is different. Link to comment Share on other sites More sharing options...
Joe X Posted June 22, 2015 Report Share Posted June 22, 2015 Do not do a permanent install for now, try passenger side first. Link to comment Share on other sites More sharing options...
David Stone Posted June 22, 2015 Author Report Share Posted June 22, 2015 I was thinking passenger as well so if there is any port noise It won't be by my head. Thanks. Link to comment Share on other sites More sharing options...
David Stone Posted June 23, 2015 Author Report Share Posted June 23, 2015 https://www.flickr.com/photos/134243985@N03/19069334635/in/datetaken/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.