RyanH Posted January 10, 2016 Author Report Posted January 10, 2016 "The air just moves from box to box because the port is shared by both sides if the enclosure."..... for this to be true the port would have to be inside the box with a divider...lol...... its out of phase I have tested to see if they are out of phase and they aren't. Now I'm really confused.
ShadeTreeMechanic Posted January 10, 2016 Report Posted January 10, 2016 Check the wiring on the subs and amp and make sure + on amp goes to + on sub and - on amp to - on sub. 91 C350 Centurion conversion ( Four Door One Ton Bronco) 250A Alternator (Second Alternator Coming Soon) G65 AGM Up Front / Two G31 AGM in Back Pioneer 80PRS CT Sounds AT125.2 / CT Sounds 6.5 Strato Pro component Front Stage CT Sounds AT125.2 / Lanzar Pro 8" coax w/compression horn tweeter Rear Fill FSD 5000D 1/2 ohm (SoundQubed 7k Coming Soon) Two HDS315 Four Qubes Each 34hz (Two HDC3.118 and New Box Coming Soon)
Joe X Posted January 10, 2016 Report Posted January 10, 2016 "The air just moves from box to box because the port is shared by both sides if the enclosure."..... for this to be true the port would have to be inside the box with a divider...lol...... its out of phase I have tested to see if they are out of phase and they aren't. Now I'm really confused. A couple of things, what's the box you built (a link if possible) and secondly what test did you perform, additionally a box for SA-10s would be on the small for those subs besides the issues you have
Recommended Posts
Archived
This topic is now archived and is closed to further replies.