solar0987 Posted May 2, 2016 Report Posted May 2, 2016 Can't find any clamp results or dybo results in said amp. I bought one, what should I expect out of it. Running 2 160 amp alts and 2 d3400s 0 gauge big 3 ect.
Karkov Posted May 2, 2016 Report Posted May 2, 2016 you should be plenty good, fuck lol wait, you have all that listed right? 2007 Chevy Tahoe (SOLD) 12 ~ FI Audio X series 10" w/BP option 2 ~ DC Audio 5.0K @0.67 3 ~ DC Audio 5.0K @1.0 2 ~ PPI 3 way sets (not installed yet) 1 ~ RF T400-4, 1 ~ RF T600-2, 1 ~ RF T600-4 4 ~ CT Sounds 5.25" Strato comps (rear fill only) 1 ~ XS Power D4800 1 ~ XS Power D3400 8 ~ XS Power XP3000 160 stock alt, Mechman 370 Elite, 185 DC Power 320+ Sq. Ft. Sound Deadener Pioneer AVH-X5500BHS Youtube: https://www.youtube.com/user/knfjdkghjudfhsgkjdhf/videos?sort=dd&view=0&shelf_id=0
im_quagmire Posted May 2, 2016 Report Posted May 2, 2016 why so overboard just for a 2500? you plan on going bigger? But What Do I Know? 2003 Chevy Monte Carlo SS 3.8 JVC KD-R975BTS Clarion EQS746 Kenwood P907PS Ascendant Audio 12" Havoc v.1 Ampere Audio 2000.1 MB Quart Onyx 800.4 XS Power D3400 - Hood XS Power D975 - Trunk Singer 240A Sky High OFC 0 & 4 gauge Kno Knoise Kolossus Deadener
solar0987 Posted May 2, 2016 Author Report Posted May 2, 2016 Atm I'm just going to run the one 18 lvl 5. But I got both 3400s for 250 locally bnib....
im_quagmire Posted May 2, 2016 Report Posted May 2, 2016 nice. but yes you'll be very well off with that electrical with room to spare. But What Do I Know? 2003 Chevy Monte Carlo SS 3.8 JVC KD-R975BTS Clarion EQS746 Kenwood P907PS Ascendant Audio 12" Havoc v.1 Ampere Audio 2000.1 MB Quart Onyx 800.4 XS Power D3400 - Hood XS Power D975 - Trunk Singer 240A Sky High OFC 0 & 4 gauge Kno Knoise Kolossus Deadener
Miguels Posted May 2, 2016 Report Posted May 2, 2016 i think his question was what he would expect from the amp and nothing about if his electrical will be enough you can expect 2500 watts from it if wired at 1 ohm my logshttp://www.stevemead...-my-new-set-up/my blow through loghttp://www.stevemead...future-updates/ 96 ss http://www.stevemeadedesigns.com/board/topic/164094-96-impala-ss-build/
solar0987 Posted May 2, 2016 Author Report Posted May 2, 2016 i think his question was what he would expect from the amp and nothing about if his electrical will be enough you can expect 2500 watts from it if wired at 1 ohm So just 2500? Not 2600 or more? I haven't seen a dyno on this amp. Most others do over rated. Was wondering same about these.. I also plan on running it at .7ohm
reedal Posted May 2, 2016 Report Posted May 2, 2016 A dyno isn't real world. It tests using a single tone that doesn't imitate the reactive load that the amp will see in the real world that will lower the actual output your subs will see. It will more than likely do more than rated. Don't worry about how much, just be confident that you bought an amp that will put out what it claims. SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32
Recommended Posts
Archived
This topic is now archived and is closed to further replies.