***update 5-16-08*** 225 Amp Alt Installed.

[dwright27]

MESSSSSS!!!!! should be clean tommorow though cause i plan on running an ass of wire before work.

the Z1

with the screen closed

and with the screen open

[dwright27]

gettin some new speakers in the doors makes a HUGE difference, even if its off the stock headunit

stock headunit???

im running a AVIC-N3 pioneer, and they wont be ran off the head unit, but a RF Punch 400.4

i am gonna buy Stephen_C's Mach 5's.

[loganberry]

stock headunit???

im running a AVIC-N3 pioneer, and they wont be ran off the head unit, but a RF Punch 400.4

i am gonna buy Stephen_C's Mach 5's.

just givin u an example, 2 sets of components in mine off the stock hu gets LOUD so u will like it

[dwright27]

just givin u an example, 2 sets of components in mine off the stock hu gets LOUD so u will like it

i loved the hertz components in the chevrolet, but im gonna leave them be

[dwright27]

i dont have any ring terminals to do the big three but when i get some, believe it will be done.

[dwright27]

well, as you can probably see, its 6:30 eastern time here, and im about to go outside and run some RCA's and shti

[Charger]

Hmm all I can say is take time to do things right and they won't come back to bite you in the ass later! Keep working hard mate!

[dwright27]

Hmm all I can say is take time to do things right and they won't come back to bite you in the ass later! Keep working hard mate!

thanks charger!!!

i have the RCA's ran, and am waiting for it to stop raining so i can pull the grinder out for these fucking non sense ass bolts. i think i found them on the bottom of the truck, and im about 99% sure itd them. so, im just gonna cut em from the bottom and pull em on out there

but i think my gas tank is blocking one of them, so that might be a problem.

no worries though, ill figure it out.

im also gonna get the power wire ran for at least the 4 channel today, if weather permits, and the holes cut for 4 of the 15's in the SILVERWALLDO!!!!

[dwright27]

on another note, i cant get either of my cameras to turn on...... so no pictures until i cant figure wtf is going on with them.

goal for today is to get the 4 channel hooked up

[dwright27]

ok, so im still trying to figure out a way to get these seats out without cutting some bolts.

i got my impact wrench out and my 15 mm socket and tried it from underneath the truck and it didnt even break it loose a bit! so im stuck on what to do know being as the impact didnt work.