low.n.louddd Posted August 25, 2016 Report Share Posted August 25, 2016 2 Nendo 6.5s, gonna be bedlined, building these things fast got about 3 hours of work into them if that so far, just need more resin, lil mat and theyll be ready to be sprayed.trimmed up and resinpooled in, solid as fuck now, bout to do a few more coats of resin on the fronts, give em a light sand n shoot.. have pics later today or tomorrow. stay tuned Got something in the works for myself... Stay tuned Previous personal builds (3) Fi Sp4 15" 6th 3 Fi sp4 15s, 6th, TFE 8.0. wind.... (6) Fi Sp4 18" DA Burban, 6 Fi Sp4 18s, plexiglass, LEDs, launched windshield on 2500 rms clamped lolz. etc (2) DC level 6 18s 2 Dc Level 6 18s in a civic hatch, NO WALL, my first big pretty build... Builds Ive done for folks: Dannys Van 12 Crossfire XSV4 18"s, 12 Crossfire 8xs, 48 XS Power d1600s, 165.5 SB4 2016 Champ Bobbys Yukon (new and old build) 4 B2 21"s in a 6th, plexiglass, LEDs, LOWSSSSS4 SSA Evil 18s, WIND WIND WIND Jacobs Silverado 2 CT Sounds EXO 15s, 6th order bandpass blowtrough Tonys Burban 6 HDC3 15s, colormatched standard ported, plexiglass, LEDs... etc Sauls Duramax 2 Sundown ZV4 18"s, 4th order blowthrough, plexiglass, LEDs, etc.. Jays Avalanche 2 DC Level 6 18s "blowthrough" plexiglass, LEDs, etc.. Codys Tahoe 4 Tantric SHD 18s, 4th, Ampere TFE 8.0, plexiglass LEDs n shiet Joes G35 4 Sundown SA 12s rammed in a g35 trunk, plexiglass, LEDs, the usual Ericks Lincoln 2 Sundown Zv4 12"s, 4th order trunk bandpass, wood grain, LEDs, etc.. Link to comment Share on other sites More sharing options...
low.n.louddd Posted August 26, 2016 Author Report Share Posted August 26, 2016 gonna get 1-2 more coats of resin tomorrow then a light sand, n shoot. easy peasy Got something in the works for myself... Stay tuned Previous personal builds (3) Fi Sp4 15" 6th 3 Fi sp4 15s, 6th, TFE 8.0. wind.... (6) Fi Sp4 18" DA Burban, 6 Fi Sp4 18s, plexiglass, LEDs, launched windshield on 2500 rms clamped lolz. etc (2) DC level 6 18s 2 Dc Level 6 18s in a civic hatch, NO WALL, my first big pretty build... Builds Ive done for folks: Dannys Van 12 Crossfire XSV4 18"s, 12 Crossfire 8xs, 48 XS Power d1600s, 165.5 SB4 2016 Champ Bobbys Yukon (new and old build) 4 B2 21"s in a 6th, plexiglass, LEDs, LOWSSSSS4 SSA Evil 18s, WIND WIND WIND Jacobs Silverado 2 CT Sounds EXO 15s, 6th order bandpass blowtrough Tonys Burban 6 HDC3 15s, colormatched standard ported, plexiglass, LEDs... etc Sauls Duramax 2 Sundown ZV4 18"s, 4th order blowthrough, plexiglass, LEDs, etc.. Jays Avalanche 2 DC Level 6 18s "blowthrough" plexiglass, LEDs, etc.. Codys Tahoe 4 Tantric SHD 18s, 4th, Ampere TFE 8.0, plexiglass LEDs n shiet Joes G35 4 Sundown SA 12s rammed in a g35 trunk, plexiglass, LEDs, the usual Ericks Lincoln 2 Sundown Zv4 12"s, 4th order trunk bandpass, wood grain, LEDs, etc.. Link to comment Share on other sites More sharing options...
79 cutty Posted August 26, 2016 Report Share Posted August 26, 2016 With the additional weight on those factory inserts from glassing in addition to the drivers I hope you have plans to beef up the mounting system on them and not just planning to use the bent grill material from the factory. Look good though. Firm believer in letting my cars do my talking! You can't rush quality, it doesn't happen overnight. Quality takes time and dedication, but the end results more than pay for it. "Black Pearl" Build Thread http://www.stevemeadedesigns.com/board/topic/67183-1985-buick-regal-limited-build-log/page-1 Link to comment Share on other sites More sharing options...
low.n.louddd Posted August 26, 2016 Author Report Share Posted August 26, 2016 With the additional weight on those factory inserts from glassing in addition to the drivers I hope you have plans to beef up the mounting system on them and not just planning to use the bent grill material from the factory. Look good though. yessir thats why i filled the back of them with resin, so they can be screwed in. also will be glued as well, plus the original tabs, theyll be fine. Got something in the works for myself... Stay tuned Previous personal builds (3) Fi Sp4 15" 6th 3 Fi sp4 15s, 6th, TFE 8.0. wind.... (6) Fi Sp4 18" DA Burban, 6 Fi Sp4 18s, plexiglass, LEDs, launched windshield on 2500 rms clamped lolz. etc (2) DC level 6 18s 2 Dc Level 6 18s in a civic hatch, NO WALL, my first big pretty build... Builds Ive done for folks: Dannys Van 12 Crossfire XSV4 18"s, 12 Crossfire 8xs, 48 XS Power d1600s, 165.5 SB4 2016 Champ Bobbys Yukon (new and old build) 4 B2 21"s in a 6th, plexiglass, LEDs, LOWSSSSS4 SSA Evil 18s, WIND WIND WIND Jacobs Silverado 2 CT Sounds EXO 15s, 6th order bandpass blowtrough Tonys Burban 6 HDC3 15s, colormatched standard ported, plexiglass, LEDs... etc Sauls Duramax 2 Sundown ZV4 18"s, 4th order blowthrough, plexiglass, LEDs, etc.. Jays Avalanche 2 DC Level 6 18s "blowthrough" plexiglass, LEDs, etc.. Codys Tahoe 4 Tantric SHD 18s, 4th, Ampere TFE 8.0, plexiglass LEDs n shiet Joes G35 4 Sundown SA 12s rammed in a g35 trunk, plexiglass, LEDs, the usual Ericks Lincoln 2 Sundown Zv4 12"s, 4th order trunk bandpass, wood grain, LEDs, etc.. Link to comment Share on other sites More sharing options...
MrSkippyJ Posted August 26, 2016 Report Share Posted August 26, 2016 are you just using resin? F150: Stock 2019 Harley Road Glide: Amp: TM400Xad - 4 channel 400 watt Processor: DSR1 Fairing (Front) 6.5s -MMats PA601cx Lid (Rear) 6x9s - TMS69 Link to comment Share on other sites More sharing options...
low.n.louddd Posted August 26, 2016 Author Report Share Posted August 26, 2016 are you just using resin? did one layer of 2 OZ mat this morning, not that weak ass autozone shit. some beefy ass mat. finishing smoothing em out now gonna shoot em shortly.. Got something in the works for myself... Stay tuned Previous personal builds (3) Fi Sp4 15" 6th 3 Fi sp4 15s, 6th, TFE 8.0. wind.... (6) Fi Sp4 18" DA Burban, 6 Fi Sp4 18s, plexiglass, LEDs, launched windshield on 2500 rms clamped lolz. etc (2) DC level 6 18s 2 Dc Level 6 18s in a civic hatch, NO WALL, my first big pretty build... Builds Ive done for folks: Dannys Van 12 Crossfire XSV4 18"s, 12 Crossfire 8xs, 48 XS Power d1600s, 165.5 SB4 2016 Champ Bobbys Yukon (new and old build) 4 B2 21"s in a 6th, plexiglass, LEDs, LOWSSSSS4 SSA Evil 18s, WIND WIND WIND Jacobs Silverado 2 CT Sounds EXO 15s, 6th order bandpass blowtrough Tonys Burban 6 HDC3 15s, colormatched standard ported, plexiglass, LEDs... etc Sauls Duramax 2 Sundown ZV4 18"s, 4th order blowthrough, plexiglass, LEDs, etc.. Jays Avalanche 2 DC Level 6 18s "blowthrough" plexiglass, LEDs, etc.. Codys Tahoe 4 Tantric SHD 18s, 4th, Ampere TFE 8.0, plexiglass LEDs n shiet Joes G35 4 Sundown SA 12s rammed in a g35 trunk, plexiglass, LEDs, the usual Ericks Lincoln 2 Sundown Zv4 12"s, 4th order trunk bandpass, wood grain, LEDs, etc.. Link to comment Share on other sites More sharing options...
low.n.louddd Posted August 28, 2016 Author Report Share Posted August 28, 2016 anddd bedlined dunnnnn Got something in the works for myself... Stay tuned Previous personal builds (3) Fi Sp4 15" 6th 3 Fi sp4 15s, 6th, TFE 8.0. wind.... (6) Fi Sp4 18" DA Burban, 6 Fi Sp4 18s, plexiglass, LEDs, launched windshield on 2500 rms clamped lolz. etc (2) DC level 6 18s 2 Dc Level 6 18s in a civic hatch, NO WALL, my first big pretty build... Builds Ive done for folks: Dannys Van 12 Crossfire XSV4 18"s, 12 Crossfire 8xs, 48 XS Power d1600s, 165.5 SB4 2016 Champ Bobbys Yukon (new and old build) 4 B2 21"s in a 6th, plexiglass, LEDs, LOWSSSSS4 SSA Evil 18s, WIND WIND WIND Jacobs Silverado 2 CT Sounds EXO 15s, 6th order bandpass blowtrough Tonys Burban 6 HDC3 15s, colormatched standard ported, plexiglass, LEDs... etc Sauls Duramax 2 Sundown ZV4 18"s, 4th order blowthrough, plexiglass, LEDs, etc.. Jays Avalanche 2 DC Level 6 18s "blowthrough" plexiglass, LEDs, etc.. Codys Tahoe 4 Tantric SHD 18s, 4th, Ampere TFE 8.0, plexiglass LEDs n shiet Joes G35 4 Sundown SA 12s rammed in a g35 trunk, plexiglass, LEDs, the usual Ericks Lincoln 2 Sundown Zv4 12"s, 4th order trunk bandpass, wood grain, LEDs, etc.. Link to comment Share on other sites More sharing options...
Kyblack76 Posted August 28, 2016 Report Share Posted August 28, 2016 Dope as per jeff. What liner do you use? I've done some raptor liner and rocket liner in the past. What do you prefer? Good shit my friend. SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
low.n.louddd Posted August 28, 2016 Author Report Share Posted August 28, 2016 Dope as per jeff. What liner do you use? I've done some raptor liner and rocket liner in the past. What do you prefer? Good shit my friend. eh I love the raptor, this is herculiner, kind of more "chunkier" if you will. but its tough as nails. i really like the raptor, and have heard alot of good things about the rocket, never used it personally doe. Got something in the works for myself... Stay tuned Previous personal builds (3) Fi Sp4 15" 6th 3 Fi sp4 15s, 6th, TFE 8.0. wind.... (6) Fi Sp4 18" DA Burban, 6 Fi Sp4 18s, plexiglass, LEDs, launched windshield on 2500 rms clamped lolz. etc (2) DC level 6 18s 2 Dc Level 6 18s in a civic hatch, NO WALL, my first big pretty build... Builds Ive done for folks: Dannys Van 12 Crossfire XSV4 18"s, 12 Crossfire 8xs, 48 XS Power d1600s, 165.5 SB4 2016 Champ Bobbys Yukon (new and old build) 4 B2 21"s in a 6th, plexiglass, LEDs, LOWSSSSS4 SSA Evil 18s, WIND WIND WIND Jacobs Silverado 2 CT Sounds EXO 15s, 6th order bandpass blowtrough Tonys Burban 6 HDC3 15s, colormatched standard ported, plexiglass, LEDs... etc Sauls Duramax 2 Sundown ZV4 18"s, 4th order blowthrough, plexiglass, LEDs, etc.. Jays Avalanche 2 DC Level 6 18s "blowthrough" plexiglass, LEDs, etc.. Codys Tahoe 4 Tantric SHD 18s, 4th, Ampere TFE 8.0, plexiglass LEDs n shiet Joes G35 4 Sundown SA 12s rammed in a g35 trunk, plexiglass, LEDs, the usual Ericks Lincoln 2 Sundown Zv4 12"s, 4th order trunk bandpass, wood grain, LEDs, etc.. Link to comment Share on other sites More sharing options...
Kyblack76 Posted August 28, 2016 Report Share Posted August 28, 2016 Werd. I really dug them both. That's what my entire wall, panels and roof was sprayed with was raptor liner. I dug it. I was gonna say that looks "chunkier" still a nice look. Nice work mate. SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.