BFB Posted April 24, 2008 Report Share Posted April 24, 2008 I'm adding a second RF T1500 and I'm not sure what I need to do to get the remote bass knob to work for both amps. There's no place for a sync cable, no master/slave, just rca in/outs. I'm wondering if I have the remote connected to the first amp, will it automatically control the second amp through the rca outs? Or should i splice in a second cable and connect both amps that way? Here's what the amp looks like... Anybody have any suggestions? Quote Link to comment Share on other sites More sharing options...
LoudBlazer Posted April 24, 2008 Report Share Posted April 24, 2008 sell them and buy a T3K Quote 1997 2 Door Blazer Bagged & Body Dropped SBC/TH350 Link to comment Share on other sites More sharing options...
EricM9104 Posted April 24, 2008 Report Share Posted April 24, 2008 sell them and buy a T3K Haha, you want two RF T1500's don't ya? BFB: You could get this, http://www.darvex.com/miva/merchant.mvc?Sc...Product_Count=1 Plugs into the head-unit and before the amps, remote gain knob. Quote 2015 Honda Civic LX 4dr | 24k miles Stock H/U and mids/highs Power Acoustik GW3-12" D2 Sub HiFonics BXX1200.1D @ 1ohm Random 2.5^3' dual ported box NVX LOC Stinger wiring throughout 1977 Chevy SWB Cammed 350 Dual exhaust Cheap Wish stereo Link to comment Share on other sites More sharing options...
LoudBlazer Posted April 24, 2008 Report Share Posted April 24, 2008 emat i dont think darvex will give you a discount for selling their products on the site : )~ good try tho. I still thin BFB should sell them and get a RF T3K Quote 1997 2 Door Blazer Bagged & Body Dropped SBC/TH350 Link to comment Share on other sites More sharing options...
EricM9104 Posted April 24, 2008 Report Share Posted April 24, 2008 emat i dont think darvex will give you a discount for selling their products on the site : )~ good try tho. I still thin BFB should sell them and get a RF T3K :lol: :lol: SonicElectronix has that same thing for 95 cents cheaper, although, with the forum discount, it's cheaper on Darvex. Quote 2015 Honda Civic LX 4dr | 24k miles Stock H/U and mids/highs Power Acoustik GW3-12" D2 Sub HiFonics BXX1200.1D @ 1ohm Random 2.5^3' dual ported box NVX LOC Stinger wiring throughout 1977 Chevy SWB Cammed 350 Dual exhaust Cheap Wish stereo Link to comment Share on other sites More sharing options...
ISO Posted April 24, 2008 Report Share Posted April 24, 2008 (edited) Its not possible with those. You will need to buy an after market piece. I can't even get a wireing diagram from them to build a device. At least with the old BDs you could buy the RFC3215 Edited April 24, 2008 by ISO Quote Isobaric - Refers to the practice of coupling two drivers together to make them act as one. "Giving up doesn't always mean you are weak; sometimes it means that you are strong enough to let go." Insanity: doing the same thing over and over again and expecting different results. The Destruction of a person builds character. Link to comment Share on other sites More sharing options...
BFB Posted April 24, 2008 Author Report Share Posted April 24, 2008 sell them and buy a T3K Great suggestion, but I already have 2 1500s bought and paid for. Quote Link to comment Share on other sites More sharing options...
mcnaught82 Posted April 24, 2008 Report Share Posted April 24, 2008 I'm adding a second RF T1500 and I'm not sure what I need to do to get the remote bass knob to work for both amps. There's no place for a sync cable, no master/slave, just rca in/outs.I'm wondering if I have the remote connected to the first amp, will it automatically control the second amp through the rca outs? Or should i splice in a second cable and connect both amps that way? Here's what the amp looks like... Anybody have any suggestions? It should control both amps when connected to 1. best bet would be to ether call Rockford or email them. They are usually pretty quick with there email response. Quote Team Deadly Hertz Link to comment Share on other sites More sharing options...
BFB Posted April 24, 2008 Author Report Share Posted April 24, 2008 Haha, you want two RF T1500's don't ya? BFB: You could get this, http://www.darvex.com/miva/merchant.mvc?Sc...Product_Count=1 Plugs into the head-unit and before the amps, remote gain knob. Thanks, that looks like it would do the job but running another set of cables is easier said than done at this point. Will keep that in mind when I rebuild everything in the fall! Quote Link to comment Share on other sites More sharing options...
EricM9104 Posted April 24, 2008 Report Share Posted April 24, 2008 Thanks, that looks like it would do the job but running another set of cables is easier said than done at this point. Will keep that in mind when I rebuild everything in the fall! You're already running a set of RCA's from the head-unit to the amps, right? Hook that unit up on the dash, plug one end into the head-unit, other end goes to the RCA cable that runs to your amps. At your amps, to hook the 2nd amp up, run an RCA cable from the output on the first amp to the input on the 2nd amp. Set the gains with that knob at full also. Quote 2015 Honda Civic LX 4dr | 24k miles Stock H/U and mids/highs Power Acoustik GW3-12" D2 Sub HiFonics BXX1200.1D @ 1ohm Random 2.5^3' dual ported box NVX LOC Stinger wiring throughout 1977 Chevy SWB Cammed 350 Dual exhaust Cheap Wish stereo Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.