Jhensley209 Posted October 8, 2016 Report Share Posted October 8, 2016 I currently have two AA havoc subs and they are dual 2 ohms. I have them wired down to .5 on a ct at1400.1 and im planning on buying another at1400.1 and strapping them. My question is if i wire the subs to 2ohm and strap the amps will each amp see a 1ohm load? Link to comment Share on other sites More sharing options...
Jessica Posted October 8, 2016 Report Share Posted October 8, 2016 yes Rest in peace, walled 87 accord build log 03' Corolla build with AA Mayhem inside. My super random youtube channel and terrible camera work. Wiring comparison by CaptainzPlanetz Wire and fuse guide by Guest SyKo13 Link to comment Share on other sites More sharing options...
ShadeTreeMechanic Posted October 8, 2016 Report Share Posted October 8, 2016 If the subs are wired .5 then each amp would see .25. you would have to rewire the subs to 2 ohms to strap or run them separate at 1 ohm each. 91 C350 Centurion conversion ( Four Door One Ton Bronco) 250A Alternator (Second Alternator Coming Soon) G65 AGM Up Front / Two G31 AGM in Back Pioneer 80PRS CT Sounds AT125.2 / CT Sounds 6.5 Strato Pro component Front Stage CT Sounds AT125.2 / Lanzar Pro 8" coax w/compression horn tweeter Rear Fill FSD 5000D 1/2 ohm (SoundQubed 7k Coming Soon) Two HDS315 Four Qubes Each 34hz (Two HDC3.118 and New Box Coming Soon) Link to comment Share on other sites More sharing options...
magillaru Posted October 8, 2016 Report Share Posted October 8, 2016 I would just run one sub per amp at 1 ohm but I'm not a fan of strapping. Or you could just sell the 1400 you have now and buy a bigger amp. Singer Alternators Team Asshole #anothershittysingerbuild Link to comment Share on other sites More sharing options...
Kyblack76 Posted October 8, 2016 Report Share Posted October 8, 2016 I would just run one sub per amp at 1 ohm but I'm not a fan of strapping. Or you could just sell the 1400 you have now and buy a bigger amp. ^^ SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold Link to comment Share on other sites More sharing options...
Jhensley209 Posted October 8, 2016 Author Report Share Posted October 8, 2016 What kind of rca do you use to link the two amps together? Can you just use a regular short set of rca's and just use one of them or is it a special cable that you are supposed to use? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.