GorillaFIngeRs Posted January 30, 2017 Author Report Share Posted January 30, 2017 Looks good I think. Sound is very underwhelming... pretty bummed at the moment. http://s1168.photobucket.com/user/mlentz2728/media/New Sub Box Build/44C9C07F-4629-4597-81BA-E554166E30DA_zpslgrdpfbo.jpg.html AQ3500.115" Fi SP41/0 Knuconceptz Power/Ground 1/0 Sky High Big 3 UpgradePioneer AVH-4200NEXXS Power D1200 Underhood Intimidator Gel In Trunk CES 250A Alternator Link to comment Share on other sites More sharing options...
kam311 Posted January 30, 2017 Report Share Posted January 30, 2017 is your sub a dvc 2? I have that same amp, it can definitely move that sub. If anything a bit oversize box would allow the sub to move even more. so far... HU- pioneer DEH-P59001B Amp- crescendo BC2000D Wire- 1/0 awg welding lead Electric- Big 3 ^same wire Subs- 2 Obsidian Audio 12 d4's Box 4ft^3 ported at 33hz. designed by Ram-Designs Link to comment Share on other sites More sharing options...
GorillaFIngeRs Posted January 30, 2017 Author Report Share Posted January 30, 2017 3 minutes ago, kam311 said: is your sub a dvc 2? I have that same amp, it can definitely move that sub. If anything a bit oversize box would allow the sub to move even more. Yup it sure is. I checked my wires that are going to the amp before I even set the sub in the box just to be sure. And I was sitting at a solid 1.0. I thought for sure this thing would move a ton in a box this size. My subsonic is set to 20hz which I know is low but I just wanted to see if the damn tong would get moving. Also, I just had dual type r's hooked up to this thing and I was flexing pretty good. I think it's the box. I dunno what else it could be.... AQ3500.115" Fi SP41/0 Knuconceptz Power/Ground 1/0 Sky High Big 3 UpgradePioneer AVH-4200NEXXS Power D1200 Underhood Intimidator Gel In Trunk CES 250A Alternator Link to comment Share on other sites More sharing options...
kam311 Posted January 30, 2017 Report Share Posted January 30, 2017 30 minutes ago, GorillaFIngeRs said: Yup it sure is. I checked my wires that are going to the amp before I even set the sub in the box just to be sure. And I was sitting at a solid 1.0. I thought for sure this thing would move a ton in a box this size. My subsonic is set to 20hz which I know is low but I just wanted to see if the damn tong would get moving. Also, I just had dual type r's hooked up to this thing and I was flexing pretty good. I think it's the box. I dunno what else it could be.... What about your gain? so far... HU- pioneer DEH-P59001B Amp- crescendo BC2000D Wire- 1/0 awg welding lead Electric- Big 3 ^same wire Subs- 2 Obsidian Audio 12 d4's Box 4ft^3 ported at 33hz. designed by Ram-Designs Link to comment Share on other sites More sharing options...
GorillaFIngeRs Posted January 30, 2017 Author Report Share Posted January 30, 2017 8 hours ago, kam311 said: What about your gain? Gain was set with a DD1 like a year ago. I can def get it retuned just to be sure that's not it but it shouldn't be the problem. AQ3500.115" Fi SP41/0 Knuconceptz Power/Ground 1/0 Sky High Big 3 UpgradePioneer AVH-4200NEXXS Power D1200 Underhood Intimidator Gel In Trunk CES 250A Alternator Link to comment Share on other sites More sharing options...
reedal Posted January 30, 2017 Report Share Posted January 30, 2017 What method did you use to set your subsonic and low pass filters? What head unit do you have? SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32 Link to comment Share on other sites More sharing options...
GorillaFIngeRs Posted January 30, 2017 Author Report Share Posted January 30, 2017 Pioneer head unit. Not sure the model. Never "tuned" my ss or low pass other than by ear. AQ3500.115" Fi SP41/0 Knuconceptz Power/Ground 1/0 Sky High Big 3 UpgradePioneer AVH-4200NEXXS Power D1200 Underhood Intimidator Gel In Trunk CES 250A Alternator Link to comment Share on other sites More sharing options...
reedal Posted January 30, 2017 Report Share Posted January 30, 2017 Do these steps at low/medium volume levels to avoid damaging your speakers. Turn your subsonic all of the way counter clockwise, turn your low pass all of the way clockwise. Check your head unit's manual for steps on how to set its low pass and high pass filters. Turn them off. Has the output of the sub changed? SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32 Link to comment Share on other sites More sharing options...
GorillaFIngeRs Posted January 30, 2017 Author Report Share Posted January 30, 2017 41 minutes ago, reedal said: Do these steps at low/medium volume levels to avoid damaging your speakers. Turn your subsonic all of the way counter clockwise, turn your low pass all of the way clockwise. Check your head unit's manual for steps on how to set its low pass and high pass filters. Turn them off. Has the output of the sub changed? Give it a shot here shortly. I'll let you know how it goes AQ3500.115" Fi SP41/0 Knuconceptz Power/Ground 1/0 Sky High Big 3 UpgradePioneer AVH-4200NEXXS Power D1200 Underhood Intimidator Gel In Trunk CES 250A Alternator Link to comment Share on other sites More sharing options...
reedal Posted January 30, 2017 Report Share Posted January 30, 2017 Also, check to make sure the "low" or "sub" setting is set to 0 or higher. If you have to change it, then you will also have to reset your gain. Which pioneer unit do you have? SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.