dmace Posted May 4, 2017 Report Posted May 4, 2017 hi im really needing help on a box design for my 2 15" kicker l7's im running them on a skar 2000x1 class d i just made a 4th order for them but its still not what im looking for im doing a little over 145 db at 42 hz but i know i can do better than that im trying to do at least in the 50's the vehicle there in is a 2015 chevy tahoe so i have plenty of room please message me if you have any info that might help thanks
ShadeTreeMechanic Posted May 4, 2017 Report Posted May 4, 2017 Two more 15s and a second amp might get you close. 91 C350 Centurion conversion ( Four Door One Ton Bronco) 250A Alternator (Second Alternator Coming Soon) G65 AGM Up Front / Two G31 AGM in Back Pioneer 80PRS CT Sounds AT125.2 / CT Sounds 6.5 Strato Pro component Front Stage CT Sounds AT125.2 / Lanzar Pro 8" coax w/compression horn tweeter Rear Fill FSD 5000D 1/2 ohm (SoundQubed 7k Coming Soon) Two HDS315 Four Qubes Each 34hz (Two HDC3.118 and New Box Coming Soon)
reedal Posted May 4, 2017 Report Posted May 4, 2017 https://en.m.wikipedia.org/wiki/Run-on_sentence Go get your measuring tape out and post your maximum available dimensions you want the enclosure in. Plenty of room because it's a Tahoe isn't an answer. SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32
Recommended Posts
Archived
This topic is now archived and is closed to further replies.