Ayork Posted January 17, 2019 Report Posted January 17, 2019 I was testing the voltage on my hu rca and now its drop to about 1.2v ... i did test begore and test at 2.2v.. anyone know what would cause a drop?
reedal Posted January 17, 2019 Report Posted January 17, 2019 What unit? What are you playing while testing? SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32
Ayork Posted January 18, 2019 Author Report Posted January 18, 2019 Its an older sony xplod single din.. playing 40hz test tone. Cant get the model number cause i had to put the truck in the shop (trans issues).
audiofanaticz Posted January 18, 2019 Report Posted January 18, 2019 Resistance in cheap rca cords will cause a MASSIVE voltage drop if you test at the back of the radio and then re-test at the end of a 17 foot cable.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.