Rcabrera11 Posted February 20, 2019 Report Posted February 20, 2019 I just purchased a dd1 to set my bass amp with. My question is does subwoofer impedance matter or affect when your amp is going to distort? Like would it matter if your running at .5 ohms or 1? Quote
Kyblack76 Posted February 20, 2019 Report Posted February 20, 2019 When sing the tool, the driver or load isnt present. 1 Quote SMD SUPER SELLER The Burban Build Blazer Build sold Acura trunk build sold
Joshdashef Posted February 20, 2019 Report Posted February 20, 2019 speaker terminals should be unplugged when you use a dd-1 Quote SMD Tool Map (2024): https://www.stevemeadedesigns.com/board/topic/226545-smd-tool-map-2024/ Great Box Bracing Examples: https://www.stevemeadedesigns.com/board/topic/202148-best-way-to-brace-a-box/?do=findComment&comment=3055002
Rcabrera11 Posted February 20, 2019 Author Report Posted February 20, 2019 I know the speaker has to be unplugged but that's what I'm worried about. when I plug my speakers back in and drop them to the .5 ohm load is the amp going to be distorted because it's at its limits at .5 ohms? Quote
mothra Posted February 20, 2019 Report Posted February 20, 2019 even if your amp did create a dirty signal at .5 ohms compared to 1 ohm, you can't get rid of that. that's an amp issue. the DD1 is helping you get the gain matched to the signal output from your source with overlap if desired. Quote if nothing changes, nothing changes You don't know what you don't know, till you don't know
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.