Jump to content

Recommended Posts

So much respect for people who drywall for a living!!!

 

So I got into the shop a bit later in the day, but worked until around 9PM-ish.  I was able to get the 2x10 joists up:

 

20210914_152939.thumb.jpg.ac5a26437eaad59784dce77e52caa587.jpg

 

I also got the closet for the A/C air handler in:

 

20210914_173327.thumb.jpg.4ec6f90e1bfe879c3c63f644c7b6a861.jpg

 

20210914_173340.thumb.jpg.11b82f4f5f8cee04f70b0e95043dd584.jpg

 

Then it was time for a break to enjoy the view of the sky behind the shop along with my usual afternoon enhancers:

 

20210914_180110.thumb.jpg.08ade9e5550bb0a9d2c478cc6e6a397f.jpg

 

20210914_175608.thumb.jpg.2db81d8f0e2628cfa0d355ae4d3566b2.jpg

 

Then it was time to start arguing with drywall.  I'm terrible at drywall.  I don't like it - it doesn't like me and mad props to anyone who knows how to do this and/or does it for a living!

 

20210914_190321.thumb.jpg.52987ca1217e343aee2bdf6033c25e44.jpg

 

20210914_190331.thumb.jpg.2c7b4c6272a182c7c4b1c024a9009a3a.jpg

 

20210914_204413.thumb.jpg.e569bd92c19d510a59f3816cb9cfd9ae.jpg

 

20210914_204422.thumb.jpg.5b38793d516238f26efa78da66cd108b.jpg

 

20210914_204431.thumb.jpg.ab76a5437f171bc455a4d8adcc297a19.jpg

 

Here is a quick video walk around:
 

 

I'll get the top on the collector room and finish out the air handler closet as well as run the electrical for the A/C and put a light in the collector closet tomorrow.  Then it's time to just start throwing up the stud walls all along the exterior walls of the shop.

 

I'll probably order the scissor lift tomorrow and see when the A/C guy can come out and get that in.  It's going to be so nice having air in the shop!

 

 

 

  • Like (+1 Rep) 2
Link to comment
Share on other sites

I don't mind drywalling looks good tho

  • Like (+1 Rep) 1

06 Charger

Pioneer double din

Pioneer 6.5 and 6×9's

Kicker ofc rca's 

0 ga knukoncept kolossus wire 

Big 3 same wire ^ 1 run 

10 ga knukoncept speaker wire

Sundown sia 3500d at 1ohm

2 Sundown sa v2 d4's in parallel 

Duralast platinum agm H7 (Main)

Xs power d3400

Trying to find a ho alt

 

 

Link to comment
Share on other sites

I got a little done today, but I didn't get much in the way of pictures.  Most notably, I got the 1st pallet of insulation board I'm going to use to insulate the ceiling.  I'll get some more pics of progress tomorrow!

  • Like (+1 Rep) 1
Link to comment
Share on other sites

Today was another one of those days full of spurts and starts.  I was able to almost find all of the Eaton BR breakers I needed.  They are hard to come by right now (so it makes perfect sense that the electrician used them?)  I was able to get some electrical done.  Most importantly, I got the breakers in and cable ran for the A/C unit.  I split the load between the 100A and 200A service panels:

 

This is the 100A service.  The bottom 4 rows were added today:

20210916_170358.thumb.jpg.7f9024f4ff3146dbb52c96530cf42d02.jpg

 

And here is what I have in the 200A box so far  I didn't take a picture after running more wire but you get the idea:

 

20210916_170413.thumb.jpg.df3378073e7d2bc85251665d7b65088b.jpg

 

I also put up some lights in the collector room that run off a switched outlet:

 

20210915_171457.thumb.jpg.a06d27ee5c75f578bca4935ea027d966.jpg

 

20210915_172914.thumb.jpg.dccf9bfcfa925b55ac47c9fd4b021340.jpg

 

Here is a pic of the insulation I'm going to adding to the ceiling, there are now 2 pallets of this in the shop:

 

20210916_170343.thumb.jpg.4ceff3356465125b83dcdbcff4d6a05a.jpg

 

The scissor lift is getting dropped at the shop tomorrow.  I'm also going to call the A/C guy and see when he can get out and install the 5-ton unit.

 

I am, without fail, working from the shop all day tomorrow.  I still have several hours of day job calls that will take priority, but hopefully between the calls I can get some more stuff done.  I'm hoping to get the rest of the stud walls in along with most of the electrical and start on the insulation/drywall.  As a stretch goal, I would like to maybe get the Laser room studded out.  We'll see how far I get. 

 

 

 

  • Like (+1 Rep) 2
Link to comment
Share on other sites

26 minutes ago, Arthur79 said:

Today was another one of those days full of spurts and starts.  I was able to almost find all of the Eaton BR breakers I needed.  They are hard to come by right now (so it makes perfect sense that the electrician used them?)  I was able to get some electrical done.  Most importantly, I got the breakers in and cable ran for the A/C unit.  I split the load between the 100A and 200A service panels:

 

This is the 100A service.  The bottom 4 rows were added today:

20210916_170358.thumb.jpg.7f9024f4ff3146dbb52c96530cf42d02.jpg

 

And here is what I have in the 200A box so far  I didn't take a picture after running more wire but you get the idea:

 

20210916_170413.thumb.jpg.df3378073e7d2bc85251665d7b65088b.jpg

 

I also put up some lights in the collector room that run off a switched outlet:

 

20210915_171457.thumb.jpg.a06d27ee5c75f578bca4935ea027d966.jpg

 

20210915_172914.thumb.jpg.dccf9bfcfa925b55ac47c9fd4b021340.jpg

 

Here is a pic of the insulation I'm going to adding to the ceiling, there are now 2 pallets of this in the shop:

 

20210916_170343.thumb.jpg.4ceff3356465125b83dcdbcff4d6a05a.jpg

 

The scissor lift is getting dropped at the shop tomorrow.  I'm also going to call the A/C guy and see when he can get out and install the 5-ton unit.

 

I am, without fail, working from the shop all day tomorrow.  I still have several hours of day job calls that will take priority, but hopefully between the calls I can get some more stuff done.  I'm hoping to get the rest of the stud walls in along with most of the electrical and start on the insulation/drywall.  As a stretch goal, I would like to maybe get the Laser room studded out.  We'll see how far I get. 

 

 

 

Making good progress my man! Keep it moving! 

  • Like (+1 Rep) 1

2011 Chevy Silverado under construction

My build log here. Check it out! 

 

Link to comment
Share on other sites

Coming along still diggin those pink 2×4's lol

06 Charger

Pioneer double din

Pioneer 6.5 and 6×9's

Kicker ofc rca's 

0 ga knukoncept kolossus wire 

Big 3 same wire ^ 1 run 

10 ga knukoncept speaker wire

Sundown sia 3500d at 1ohm

2 Sundown sa v2 d4's in parallel 

Duralast platinum agm H7 (Main)

Xs power d3400

Trying to find a ho alt

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...