Wifebtr Posted April 27, 2023 Report Share Posted April 27, 2023 Thanks for posting. That was a joy to read through. You seem fairly knowledgeable and you are rockin the DIY attitude. Let us know what you end up measuring when you compete! Quote Link to comment Share on other sites More sharing options...
mel80 Posted April 28, 2023 Author Report Share Posted April 28, 2023 thanks, will do im heading down tonight right after work Quote Link to comment Share on other sites More sharing options...
mel80 Posted May 2, 2023 Author Report Share Posted May 2, 2023 1 Quote Link to comment Share on other sites More sharing options...
mel80 Posted May 3, 2023 Author Report Share Posted May 3, 2023 getting some much needed work done 2 layers over most of it of 294 mil stuff and 3 layers in a few spots were i could were it wouldnt interfer with headliner going back in Quote Link to comment Share on other sites More sharing options...
mel80 Posted May 5, 2023 Author Report Share Posted May 5, 2023 recoil has new amps coming amp ill be getting 3x of the 2500's to replace the 1200's , i also did start to deaden the doors got the driver side door outer skin done today , hoping to get one door done each day , i think im going to get some 150 mil stuff to do the inner panel with instead of using the 394mil stuff on that as well 2 Quote Link to comment Share on other sites More sharing options...
mel80 Posted May 6, 2023 Author Report Share Posted May 6, 2023 both front doors done added a 3rd layer to the drivers door and did 3 layers on the passenger door , also got up as high on the firewall as i could without removing the dash and the front seat floor area.now i have bigger windshield issues , it flexed alot before but now its really flexing to the point im afriad im going to break it even at lower volumes and to top it off im about to dbl my amplifier power . ive got to figure out some thing to help there i really dont wanna put a floor to roof bar in at the top of the windshield but might be my only option Quote Link to comment Share on other sites More sharing options...
mel80 Posted May 9, 2023 Author Report Share Posted May 9, 2023 pics from when i started the trunk today ive got 3 layers on the outer quarter skins and 2 layer son everything inboard except for the spare tire well im going to get some spray sound deadnber to apply in there and then ill do a layer of the 394 mil stuff ive been doing everywere else didnt get a finished pic as it was getting late and i needed to get the box back in the car . as u can see in the one pick the trunk in this car is vented ( pic of the left side rear quarter , im wondewring if i should remove the vent and seal the trunk , though short of bolting my trunklid down the trunk is going to leak bad regardless Quote Link to comment Share on other sites More sharing options...
Karkov Posted May 12, 2023 Report Share Posted May 12, 2023 I've never done a trunk build so I'm not sure on the vent. Hopefully someone else chimes in. Quote 2007 Chevy Tahoe (SOLD) 12 ~ FI Audio X series 10" w/BP option 2 ~ DC Audio 5.0K @0.67 3 ~ DC Audio 5.0K @1.0 2 ~ PPI 3 way sets (not installed yet) 1 ~ RF T400-4, 1 ~ RF T600-2, 1 ~ RF T600-4 4 ~ CT Sounds 5.25" Strato comps (rear fill only) 1 ~ XS Power D4800 1 ~ XS Power D3400 8 ~ XS Power XP3000 160 stock alt, Mechman 370 Elite, 185 DC Power 320+ Sq. Ft. Sound Deadener Pioneer AVH-X5500BHS Youtube: https://www.youtube.com/user/knfjdkghjudfhsgkjdhf/videos?sort=dd&view=0&shelf_id=0 Link to comment Share on other sites More sharing options...
mel80 Posted May 13, 2023 Author Report Share Posted May 13, 2023 im seriously considering buying either 1 more sub or 3 more and doing a walled build with 4 or 6 of these subs in the future Quote Link to comment Share on other sites More sharing options...
mel80 Posted May 18, 2023 Author Report Share Posted May 18, 2023 more subs on the way , lol this is escalating quickly , though im still not sure what im going to do with them yet Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.