Bass4Lyfe Posted June 25, 2008 Report Share Posted June 25, 2008 For my next build in the camry I want to cut my rear seat out in the middle and replace it with a 15" DC LVL 3, and the port. I would rather not port through the rear deck. What should I do to cut out the middle portion of my rear seat? There is no hole that goes through (to the trunk), and it's sheetmetal on the back of the seat. I will take pictures tonight (and get you guys some of my new tint) but it will be similiar to that one trunk setup on here with blue velvet? Don't know if you guys know what I'm talking about. Thanks and I know this is confusing ~Matthew 1998 Toyota Camry XLE V6 3L (1) ScyTek Astra 4000RS-2W-1 2-Way Remote Start Alarm with Shock and Proximity (1) 20% Tint All Around (Gately Audio) (1) 250 Amperage HO Alternator (1) Big 3 Done In 1/0 (2) Kinetik HC2400 Power Cell (1) Alpine IVA-D106 Receiver (1) Peripheral Video Bypass Device (4) Alpine SPS-17C2 Speakers (1) Alpine KCE-422i iPod Control Interface (4) Sheets Dynamat Extreme; for speakers (1) 10 Square Feet Hushmat (Trunk & Rear Deck) (4) DC Audio Level 4 15" D2 Subwoofer w/ Level 5 Coils (1) Wall Built By David, Tuned to 32 Hz (1) Rockford Fosgate T40001bd Amplifier (1) Stinger 1/0 Wiring (2 runs of + 2 runs of -) (1) Stinger Volt Meter Link to comment Share on other sites More sharing options...
BassJunkie Posted June 25, 2008 Report Share Posted June 25, 2008 I'd rather hack the rear deck up because I'm sure its cheaper than a new rear seat if you ever decide to put it back to stock. 1986 C20 Suburban 9 American Bass XFL 15's B2 M1MKII 14v XS Power Batteries Maxwell Caps Acoustical energy is free. Electrical energy is not you havent lived until you've hit a screw with a router. Link to comment Share on other sites More sharing options...
dr.db Posted June 25, 2008 Report Share Posted June 25, 2008 I'd rather hack the rear deck up because I'm sure its cheaper than a new rear seat if you ever decide to put it back to stock. Much better way to go..just make a new deck panel. Link to comment Share on other sites More sharing options...
flashlight_65 Posted June 25, 2008 Report Share Posted June 25, 2008 Much better way to go..just make a new deck panel. x2 My builds: my caddy my 'hoe friends impala Link to comment Share on other sites More sharing options...
Bass4Lyfe Posted June 25, 2008 Author Report Share Posted June 25, 2008 Hmm ... okay so cut out all the sheetmetal and maybe place the port (from the trunk) up through there? I've NEVER done fab work so I"m a NEWB thanks ahhaa ~Matthew 1998 Toyota Camry XLE V6 3L (1) ScyTek Astra 4000RS-2W-1 2-Way Remote Start Alarm with Shock and Proximity (1) 20% Tint All Around (Gately Audio) (1) 250 Amperage HO Alternator (1) Big 3 Done In 1/0 (2) Kinetik HC2400 Power Cell (1) Alpine IVA-D106 Receiver (1) Peripheral Video Bypass Device (4) Alpine SPS-17C2 Speakers (1) Alpine KCE-422i iPod Control Interface (4) Sheets Dynamat Extreme; for speakers (1) 10 Square Feet Hushmat (Trunk & Rear Deck) (4) DC Audio Level 4 15" D2 Subwoofer w/ Level 5 Coils (1) Wall Built By David, Tuned to 32 Hz (1) Rockford Fosgate T40001bd Amplifier (1) Stinger 1/0 Wiring (2 runs of + 2 runs of -) (1) Stinger Volt Meter Link to comment Share on other sites More sharing options...
flashlight_65 Posted July 2, 2008 Report Share Posted July 2, 2008 try it out man. i'm reluctant to cut into my baby too. it hurts my heart to even put the hole in the firewall for the 1/0. you wont learn unless you try. good luck My builds: my caddy my 'hoe friends impala Link to comment Share on other sites More sharing options...
99vic Posted July 2, 2008 Report Share Posted July 2, 2008 its not that hard i did it in my car in less than 20 mins with a dremel REST IN PARADISE BIG RICH (Sqmonte) never forgotten Why do you guys ALWAYS dispute on NUMBERS????? It's such a played out argument, so fucking annoying.... It's 12 fuckin 15's.... It's louder than you... Shut the fuck up... /Rant I'm so jealous, it makes me want to club baby seals. That shit gets down HARD!dont buy from knowledge he will scam you. http://www.stevemeadedesigns.com/board/topic/30995-official-knowledge-feedback/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.