byron2817 Posted June 29, 2008 Report Posted June 29, 2008 well i just build a box for my 15" FI SSD.i made id with 1/2 Mdf so i need to make it stronger.what can i do?? is fiberglass & bracing a good idea NEED TO GET LOUDER!!!
hotshot27 Posted June 29, 2008 Report Posted June 29, 2008 well i just build a box for my 15" FI SSD.i made id with 1/2 Mdf so i need to make it stronger.what can i do?? is fiberglass & bracing a good idea if you absolutely can't rebuild, i would do 5-6 layers of glass on the inside. how big is this box? Current Setup: Factory HU with LOC mids/highs-Insignia components Sub- E8 in bass tube Amp- sae-1200d Show Setup: HU-Sony MEX-1HD (brings massive respect for sony) fronts - Infinity Kappa perfect comps rears- Infinity Kappa coax mid/high amp - Autotek 5600 Subs - 2 RE SE 15's Sub Amps - 2xSAE-1200D Box - 5cubes sealed Wire- Lots of Knu 1/0 SECOND SKIN
dr.db Posted June 29, 2008 Report Posted June 29, 2008 well i just build a box for my 15" FI SSD.i made id with 1/2 Mdf so i need to make it stronger.what can i do?? is fiberglass & bracing a good idea Start over with minimum three quarter shit...How much power?
Boon Posted June 29, 2008 Report Posted June 29, 2008 Build another 1/2" box around the existing one. 1/2" MDF will get ripped to bits. 10.x volts fo' life!
shooter69 Posted June 30, 2008 Report Posted June 30, 2008 Speaking of that (not trying to thread jack :-) ) I ordered my 15" BL a few days ago. Should 1" be thick enough to where I won't need any bracing? (1)Fi BTL 15 (1)AQ 2200d 4.33 Cubes~33hz Big Three done XS 1200 in the back
flashlight_65 Posted June 30, 2008 Report Posted June 30, 2008 bracing in general is a good idea. if you dont want to lose too much internal volume use 3/4" threaded rod. My builds: my caddy my 'hoe friends impala
Recommended Posts
Archived
This topic is now archived and is closed to further replies.