Toxiccasper Posted July 9, 2008 Report Share Posted July 9, 2008 Woah 9 cubes total for 2 18s thats small Quote Link to comment Share on other sites More sharing options...
littleitaly1990 Posted July 9, 2008 Report Share Posted July 9, 2008 with that size box u could probably put a good 3-4000 watts per sub... Quote A vitrolic, megalomaniacal sadistic psychopath. Link to comment Share on other sites More sharing options...
wL<3bass Posted July 9, 2008 Report Share Posted July 9, 2008 port is i think 5 high 20 wide 17 deep....if i remember right..9 cubes b 4 displacement ..and thats the thing the caps are not to hot just warm.... 9 cubes before displacement, HOLY SHIT, yeah thats WAY to small. Thats what I thought I was like "holy bajeezus....." Quote Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references... Link to comment Share on other sites More sharing options...
greg662 Posted July 9, 2008 Report Share Posted July 9, 2008 (edited) My new 18" BTL does the same thing it kind of has a metal smell to it. is that how yours smell? Edited July 9, 2008 by greg662 Quote 2 15" DC LVL 5' crescendo 5500 yellow top under the hood and two xs power d3100 Big three upgrade Rockford Fosgate T162S components in front Rockford Fosgate T152 in the back Dynamat everywhere Link to comment Share on other sites More sharing options...
deafyT Posted July 9, 2008 Report Share Posted July 9, 2008 this time give them around 12 cubes with that amount of power12 cubes after displacement. i'd go with more than that. 6 is pretty much the recommended airspace for the recommended power. With that little power, i'd be inclined to ask for a much looser suspension and give them 7-8 cuft each...after displacements. in fact, i think that's what i did..... Quote ((((((((((((((((((((((((((((((((((((((((((((((((((((in stereo))))))))))))))))))))))))))))))))))))))))))))))))))) team audio thugz uuUhhHhhHhh. straight ghanxstuh since 2007. Link to comment Share on other sites More sharing options...
David Posted July 9, 2008 Report Share Posted July 9, 2008 uh actually the reccomend is 5 to 10 cubes per 18, since he plans on adding more power 6 cubes per sub should be fine. Quote Link to comment Share on other sites More sharing options...
deafyT Posted July 9, 2008 Report Share Posted July 9, 2008 5-10 is a pretty broad recommendation. 8 is on the large side for that 18 on recommended power. it'll sound boomy. he's going 1500w now, how much is he trying to send them later? Quote ((((((((((((((((((((((((((((((((((((((((((((((((((((in stereo))))))))))))))))))))))))))))))))))))))))))))))))))) team audio thugz uuUhhHhhHhh. straight ghanxstuh since 2007. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.