The Performer Posted July 22, 2008 Report Share Posted July 22, 2008 It makes the sound with either a cd in the HU or with an Ipod? My old sony deck had a aux input (3.5mm jack input) which I can remember wasn't the best when it came to sound quality... Quote CERTIFIED BITCHES!!! Not being new at something doesn't mean anything. Just because a prostitute isn't new at what she does, doesn't change the fact that she still 'sucks' Click to see my build! Proud DC owner Link to comment Share on other sites More sharing options...
wL<3bass Posted July 22, 2008 Report Share Posted July 22, 2008 (edited) wires are wires.the walmart rcas are just as good as the monster wire ones. as long as theres no tears in the wire or anything they should be good, check your grounds. and it could be in the line output converter pre outs? like on some pioneers? Wrong not all wires are created equal (LOL) different twists and jackets help block noice from entering into the interconnects. CLICK ME! take a look at that I have older version iirc mine are zn6 edit: and I do have my RCAs ran on the opposite side from my power but I had run some cheap interconnects just for testing and thought "man this brand new pioneer hu has some noise" Put my streetwires in and not a bit noise. Edited July 22, 2008 by wL<3bass Quote Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references... Link to comment Share on other sites More sharing options...
The Performer Posted July 22, 2008 Report Share Posted July 22, 2008 Wrong not all wires are created equal (LOL) different twists and jackets help block noice from entering into the interconnects.CLICK ME! take a look at that I have older version iirc mine are zn6 edit: and I do have my RCAs ran on the opposite side from my power but I had run some cheap interconnects just for testing and thought "man this brand new pioneer hu has some noise" Put my streetwires in and not a bit noise. Those are nice cables! Yes, ALWAYS run your RCA's on the opposite side of the vehicle and try not to cross your power wire any where in your setup. Makes for a great ending sound. Quote CERTIFIED BITCHES!!! Not being new at something doesn't mean anything. Just because a prostitute isn't new at what she does, doesn't change the fact that she still 'sucks' Click to see my build! Proud DC owner Link to comment Share on other sites More sharing options...
Guest aseanj52 Posted July 22, 2008 Report Share Posted July 22, 2008 I am having the same problem. Just a slight static sound. Only audible with volume below 5. I have tried changing grounds 3 times, i just kinda gave up. Since i never have the radio below 10. Quote Link to comment Share on other sites More sharing options...
honda Posted July 22, 2008 Author Report Share Posted July 22, 2008 I am having the same problem. Just a slight static sound. Only audible with volume below 5. I have tried changing grounds 3 times, i just kinda gave up. Since i never have the radio below 10. Yeah, my problem is exactly like that, only present at realy realy low volume. My power and rca's are ran on the opposite side but the I ran my rca's along with the speaker wires going up to the front speakers. I think im going to re-run them and try to eliminate crosing of power and rca's as much as possible and run new rca's. So are streetwires cable better than monsters' top notch cable? here is the Monster Cable I'm lookin at: http://www.sonicelectronix.com/item_8157_M...I404+4C+5M.html Quote My Soundz: '06 ACCoRD Diamond Hex (front)........................Diamond 2ch x 100Wrms............................Ought-guage Power wire and BIG THREE Diamond 6x9 (rear deck).................AudioQue AQ1200d @ 1ohm........................MTX re-Q (sound processor for stock HU) CDT tweets (rear doors)..................Alpine 4ch x 45Wrms.................................Clarion 7band EQ TWO Diamond D6 12" DVC 4ohm Coming soon upgrades: Batts dynamat trunk kit Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.