What Battery Terminals Should I Use

[99vic]

i keep running in to problems, im trying to do my big 3 with 1/0 and i have these terminals

http://www.tsunamionline.com/product.php?id=39

my problem is my 1/0 wont fit and i cant think of a way to run the 1/0 to my amp and + to alt and be able to make it fit. is there something i can use? i have seen a few cars with a plate but cant find one.

[Coolwazabi]

you can get reducers or a different terminal

[reinke]

find a set of reducers. the will take the 0 awg and let in plug into the 4 awg spots on the terminals

[99vic]

i have been looking for another terminal but the ones i find are 1- 1/0 and 1- 4guage i cant find one with 2- 1/0

these are all i seem to find

http://www.darvex.com/miva/merchant.mvc?Sc...duct_Code=BTMPS

http://www.darvex.com/miva/merchant.mvc?Sc...t_Code=SBT83102

Edited August 12, 2008 by 99vic

[Audiobahnaholic]

Just trim the wire down until it will fit into the hole.

[ALPINE408]

Or you can buy a batt like the kintic and use I hole crimpers and bolt down as many runs as needed

Go look at my alts on my build Vic the front batt already has 6 runs of 2/0 bloted str8 to batt

[99vic]

Or you can buy a batt like the kintic and use I hole crimpers and bolt down as many runs as needed

Go look at my alts on my build Vic the front batt already has 6 runs of 2/0 bloted str8 to batt

yeah thats what im going to do eventually, but i have to save up for kinetik 2400s, i need something that will work for now without damaging anything.

[Lice_01]

what about these?

http://www.rockfordfosgate.com/products/pr...S&p_status=

[99vic]

what about these?

http://www.rockfordfosgate.com/products/pr...S&p_status=

thats expensive, but it will work thanks gotta order 2

[sactownstang]

let me know what they cost thoe are hott!!!