inline audio Posted October 27, 2008 Report Posted October 27, 2008 i have one re 15 se. and i have the box built for two. because im going to get another very soon. i was wonderin why it sounds bad when it hits the highs. is it because there is to much air space for just the one? Quote
JPagan Posted October 27, 2008 Report Posted October 27, 2008 is your box a single chamber or divided chamber?what is the low pass filter set to on your amp? Quote
inline audio Posted October 27, 2008 Author Report Posted October 27, 2008 its a single it is 12 cubic feet and i think it is on full. Quote
JPagan Posted October 27, 2008 Report Posted October 27, 2008 (edited) lpf should be set around 80-90hz for subs. Edited October 27, 2008 by Jpagan1993 Quote
wL<3bass Posted October 27, 2008 Report Posted October 27, 2008 its a single it is 12 cubic feet and i think it is on full. Wow....turn it to LP or LPF your letting it see a full range spectrum of sound it needs 80hz and below. Quote Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references...
inline audio Posted October 27, 2008 Author Report Posted October 27, 2008 umm im really not sure just got it hooked up tonight but i think it is at 80. Quote
JPagan Posted October 27, 2008 Report Posted October 27, 2008 If it is set at 80hz that is good, you said you using the box with one sub and it is meant for 2 and it is a single chamber box. Once you get the other sub in it should sound good Quote
AI James Posted October 27, 2008 Report Posted October 27, 2008 12 cubes for 2 15s seems like to much to me Quote
inline audio Posted October 27, 2008 Author Report Posted October 27, 2008 thats what it said when i got the box demesions. but good i was just worried when it sounded weird. Quote
wL<3bass Posted October 27, 2008 Report Posted October 27, 2008 thats what it said when i got the box demesions. but good i was just worried when it sounded weird. is that 12 cubes before or after displacement? Quote Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.