jesseanson Posted October 28, 2008 Report Share Posted October 28, 2008 im thinkin about gettin a 2003 nissan 350z and i was gunna try to get 2 15 inch bl's walled in there but im not so sure it will fit. what do you guys think? Quote 2004 gmc Yukon 270 amp mechman alt. 1 odyssey PC1500 up front 6 kinetik HC2400's in the back 2 18" BTL's fully loaded 2 saz-3500d's strapped 155.7db @ 38hz sealed MY YOUTUBE!!! Link to comment Share on other sites More sharing options...
BassJunkie Posted October 28, 2008 Report Share Posted October 28, 2008 im thinkin about gettin a 2003 nissan 350z and i was gunna try to get 2 15 inch bl's walled in there but im not so sure it will fit. what do you guys think? Thats going to be a tight squeeze, you will have to do something about the rear brace in the back. Quote 1986 C20 Suburban 9 American Bass XFL 15's B2 M1MKII 14v XS Power Batteries Maxwell Caps Acoustical energy is free. Electrical energy is not you havent lived until you've hit a screw with a router. Link to comment Share on other sites More sharing options...
AI James Posted October 28, 2008 Report Share Posted October 28, 2008 not a tight squeeze imo should be pretty eazy for 2 15s Quote Link to comment Share on other sites More sharing options...
Shyne151 Posted October 28, 2008 Report Share Posted October 28, 2008 It's doable... but I don't know that I would ruin such a nice car as a 350z to put a wall in it... Quote -Installer for Duke's Car Stereo 2000 Pontiac Grand Prix - Ported Eaton M90 S/C, 3.5" pulley, XS Power Headers, 1.9 Rockers, FWI, Poly Motor Mounts, Custom Tune. RF T1000-1bdCP and T400-4 Boston Acoustics SPG 555 Kenwood eXcelon 995 RF Punch 6.5" components and MB Quart Premium 6x9"s Powermaster Alternator, YellowTop D34, Vmax CT1000 Link to comment Share on other sites More sharing options...
a_plus Posted October 28, 2008 Report Share Posted October 28, 2008 It's doable... but I don't know that I would ruin such a nice car as a 350z to put a wall in it... x2 Quote my setup: alpine iva-w205 fosgate t30001 rf t8004 re 6x9 2 re sx 15's 4 inch fosgate fanatic q components hertz 6.5 comp kicker 1/0 wiring ipod direct connect 2 optimas batts in the middle of rebuilding Link to comment Share on other sites More sharing options...
jesseanson Posted October 28, 2008 Author Report Share Posted October 28, 2008 It's doable... but I don't know that I would ruin such a nice car as a 350z to put a wall in it... this is true but do you think i could fit 2 15s behind the rear brace thing instead? Quote 2004 gmc Yukon 270 amp mechman alt. 1 odyssey PC1500 up front 6 kinetik HC2400's in the back 2 18" BTL's fully loaded 2 saz-3500d's strapped 155.7db @ 38hz sealed MY YOUTUBE!!! Link to comment Share on other sites More sharing options...
dwright27 Posted October 28, 2008 Report Share Posted October 28, 2008 i drove one with a JL 10 and a pioneer double din and that thing sounded GREAT!!! the 10 was in the brace Quote 2006 F-150 4 DC XL M2 18's Walled Daily Driver XS Power 4 DC 3.5kw Team DC Team S.P.L. Lot of Audio Technix and 1/0 DC Audio Dealer American Bass Dealer XS Power Dealer Audio Technix Dealer Link to comment Share on other sites More sharing options...
Shyne151 Posted October 29, 2008 Report Share Posted October 29, 2008 this is true but do you think i could fit 2 15s behind the rear brace thing instead? 12"s probably... 15"s idk... here is a couple 350z that have rolled thru our shops to give you ideas: http://www.dukescarstereo.com/gallery_view.cfm?id=67 http://www.dukescarstereo.com/gallery_view.cfm?id=40 second one was a demo car for kenwood. Quote -Installer for Duke's Car Stereo 2000 Pontiac Grand Prix - Ported Eaton M90 S/C, 3.5" pulley, XS Power Headers, 1.9 Rockers, FWI, Poly Motor Mounts, Custom Tune. RF T1000-1bdCP and T400-4 Boston Acoustics SPG 555 Kenwood eXcelon 995 RF Punch 6.5" components and MB Quart Premium 6x9"s Powermaster Alternator, YellowTop D34, Vmax CT1000 Link to comment Share on other sites More sharing options...
F N LO Posted November 16, 2008 Report Share Posted November 16, 2008 Ive installed a system for a customer where we took the storage and factory sub panels out and made mdf trim plates and put 2 12s right behind the seats, braced with mdf, and angle iron, the dynamatted... it sounded great, alot of work, still lets you keep your rear space... i tryed to find pics but no luck...ill c wat i can do... Quote Link to comment Share on other sites More sharing options...
Saltine Posted November 16, 2008 Report Share Posted November 16, 2008 heres one my boy done a while back...master installer baby...you need flash player to view http://www.erichunn.com/installs/350Z/inde...lash=false& http://www.erichunn.com/installs.htm Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.