Guest Posted December 19, 2008 Report Share Posted December 19, 2008 Input Impedance 0.25 Ohm. fatal errorz? Quote Link to comment Share on other sites More sharing options...
roscoe1129 Posted December 19, 2008 Report Share Posted December 19, 2008 the D6 subs are either dual 2 or dual 4 you will have to put a meter to the coils to see. Quote Some people need a sympathetic pat... on the head...with my hammer Scientia est Vox "In Nomine Patris et Filii et Spiritus Sancti" DONT BE AFRAID TO USE THE SEARCH BUTTON!!! SMD SUPER BUYER/SELLER Link to comment Share on other sites More sharing options...
bobonit Posted December 19, 2008 Report Share Posted December 19, 2008 The site says "Available in Dual 2 Ohm or Dual 4 Ohm " so I would check each coil for a dc resistance of 2 or 4 ohm. The DC Resistance will usually measure a little less than the impedance of the coil. Quote 97 Maxima SE Bunch of shit going in, check out the build Build Log Link to comment Share on other sites More sharing options...
wildbeast15 Posted December 19, 2008 Author Report Share Posted December 19, 2008 k i just did it and got a 1.98 on both.... i wanna take a pic but camera on my phones busted... so is the sub fine... Quote The set up your talking about would sound great in my Tahoe. Trade you my dog for it. He has one eye but that only makes for bad depth perception so hey so what if he is running into shit, look at it this way he is easy to sneak up ninja style on. (right side only)</div> Link to comment Share on other sites More sharing options...
n8ball2013 Posted December 19, 2008 Report Share Posted December 19, 2008 ever think that your cadence are hooked up to a two ohm or higher load and the diamond was at one ohm? Quote THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger. Link to comment Share on other sites More sharing options...
wildbeast15 Posted December 19, 2008 Author Report Share Posted December 19, 2008 (edited) both at 2.... cadence was at 2 when i hooked it up its going to 1 now... lol Edited December 19, 2008 by wildbeast15 Quote The set up your talking about would sound great in my Tahoe. Trade you my dog for it. He has one eye but that only makes for bad depth perception so hey so what if he is running into shit, look at it this way he is easy to sneak up ninja style on. (right side only)</div> Link to comment Share on other sites More sharing options...
*1LOWSUV* Posted December 19, 2008 Report Share Posted December 19, 2008 Put the sub back in your shed and call it done/ : Quote [email protected] Link to comment Share on other sites More sharing options...
siucsaluki11 Posted December 19, 2008 Report Share Posted December 19, 2008 Input Impedance 0.25 Ohm.fatal errorz? i think by 1/4 Ohm, they mean its a 2 ohm DVC, and can be run at 1 or 4 ohm Quote woman..cant live with em...cant shoot em...guess were all fucked You might be a Redneck if you use your leftover gutters for a speaker box port... YOU JUST LOST THE GAMER.I.P. Blazer=========================Last setup was in the 141s on music (37hz) with 2 12s and 1kw in a 4dr blazer.2010 Mitsubishi Lancer DE2 12in Clarions (kept from blazer)HiFonics BRZ1700.1d (at 2 ohms BLOWN) [JBL GTS180X for subs currently 60wRMS x2ch!!!!!! This works for till i get the blown amp fixed] Alpine 4ch salvaged from blazer (currently near death)9887 peerless 7s in the doors and CDT tweeters ran active no speakers in the rearKintik HC1400 under the hood.metered once a while ago, dont remember it...was piss poor compared to the blazer, mid 130s i think....looking to replace subs and amp when i have money. Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.