Dbass Posted January 16, 2009 Report Share Posted January 16, 2009 hey guys, i'm new here but not to the BOOM, i'm currently running in my car 1 15" Mtx 9500 with a Hifonics Brutus 1600, in a sledge hammer duplicate box, and the car is an 96 integra hatch. The measurements are 33" side to side,14" height, and 19" front to back, The trunk has more room to it but due to the back wiper/motor and the wheel wells, i don't wanna bother going under and over it, so pretty much rectangle. I was thinking sub up port back, due to it being a hatch and not trunk and more air travel, plus its for daily loudness, the sledge hammer's not doing it for me anymore, and i know i can push more out of the mtx then what i can now, also i need more upgrades but due to the ARTIC WIND, i ain't doing sh*t . Would apprciate your help and yes i went thru the steps lol Quote 04 Acura TL Sundown build coming soon. Link to comment Share on other sites More sharing options...
Dbass Posted January 17, 2009 Author Report Share Posted January 17, 2009 c'mon guys, need sum help any would help... Quote 04 Acura TL Sundown build coming soon. Link to comment Share on other sites More sharing options...
Mosin Posted January 17, 2009 Report Share Posted January 17, 2009 Be patient, someone will help you eventually. Quote Derp. Link to comment Share on other sites More sharing options...
Dbass Posted January 18, 2009 Author Report Share Posted January 18, 2009 just wanna know what i can do to the 9500, knowning its outrated on the prices, but then i got it for a decent price. lmk guys, countin on ya...... Quote 04 Acura TL Sundown build coming soon. Link to comment Share on other sites More sharing options...
Mosin Posted January 19, 2009 Report Share Posted January 19, 2009 just wanna know what i can do to the 9500, knowning its outrated on the prices, but then i got it for a decent price. lmk guys, countin on ya...... IMO for a loud daily, go sub up port back. IDK what the Sledgehammer specs/tuning are, but I'd recommend 2.25cu. ft. and 32Hz tuning for your 9500... Fs - 31.90Hz Qms - 3.78 Cms - 0.066mm/N Mms - 375.20g Rms - 19.89 kg/s Vas - 2.474ft XMax - 1.010in D - 13.082 in. Sd - 134.41in. Vd - 135.77 in. Qes - 0.79 Re - 1.71 Bl - 12.74Tm Prms - 1000W Qts - 0.655 SPL - 87.10db For designing to your specs, I'm not the man for that job.. Quote Derp. Link to comment Share on other sites More sharing options...
wL<3bass Posted January 19, 2009 Report Share Posted January 19, 2009 IMO for a loud daily, go sub up port back. IDK what the Sledgehammer specs/tuning are, but I'd recommend 2.25cu. ft. and 32Hz tuning for your 9500...Fs - 31.90Hz Qms - 3.78 Cms - 0.066mm/N Mms - 375.20g Rms - 19.89 kg/s Vas - 2.474ft XMax - 1.010in D - 13.082 in. Sd - 134.41in. Vd - 135.77 in. Qes - 0.79 Re - 1.71 Bl - 12.74Tm Prms - 1000W Qts - 0.655 SPL - 87.10db For designing to your specs, I'm not the man for that job.. 2.25cuft fora 15.....too small and I don't care what mfg specs are....I'd do 3-4cubes tuned low 31-33hz. Quote Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references... Link to comment Share on other sites More sharing options...
Dbass Posted January 19, 2009 Author Report Share Posted January 19, 2009 thanx guys, but yeah my sledge hammer box is to that spec, right off the mtx tech pdf sheet, i made it exactly how it is on the sheet except, due to i couldn't get the 1 inch face board i ended up putting 2 3/4 mdf togeather for that super, face board lol, i wanted sumthin more of a comp box not no ordinary box, i was thinking of a box to fill up my trunk and exactly what you said , sub up port back, guys got an images lmk i stink @ that adobe, stuff (sorry if i dunt no what the programs called) thankx for the help Quote 04 Acura TL Sundown build coming soon. Link to comment Share on other sites More sharing options...
Dbass Posted January 19, 2009 Author Report Share Posted January 19, 2009 lol and yea i forgot to mention its around 2.4 almost 2.5 cubic feet :S <3Bass got any ideas on that box you recommend? Quote 04 Acura TL Sundown build coming soon. Link to comment Share on other sites More sharing options...
Dbass Posted January 23, 2009 Author Report Share Posted January 23, 2009 anymore help guys? Quote 04 Acura TL Sundown build coming soon. Link to comment Share on other sites More sharing options...
Team_DC-Derrick Posted January 24, 2009 Report Share Posted January 24, 2009 subs up port up seems to hit alot deeper IMO, since im also working with a integra but thats just me ! Quote The DC Integra 3 18s to 6 15 build log Team_DC-Derrick's Youtube Team DC Audio where theres a will theres a wall....... I just realized Steve has reach Voldemort status, over on JP's site he is the one who will not be named....."We dont speak his name over here, fearing it will destroy us" LOL not even in hush tones Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.