creyc Posted February 8, 2009 Report Share Posted February 8, 2009 I'm looking to replace the battery under the hood on my 2001 Blazer, and trying to figure out if I should just put a good lead acid battery in or if I would benefit from a Kinetik/Powermaster AGM type battery. I've got an HC1800 in the back, and need more amp-hours so I was hoping to gain something up front. Any idea what I can fit? 2001 Chevy Blazer (2) SAZ-3000Ds (2) custom 18" Madmax subs in a second row wall Rockford 600-4 Pioneer PRS components Pioneer P800PRS deck Link to comment Share on other sites More sharing options...
amazinblazin10 Posted February 10, 2009 Report Share Posted February 10, 2009 i have the same situation my friend, i'm either going to go with a kinetik 1800 up front, and one in back or a optima yellow top on front with kinetik bringing up the rear. 1997 Dodge Ram Van 2500 Big III addition with 1/0 awg wiring all throughout Lightning Audio Strike S4.1000.1D Jenson XA2250 2 - 12" Mtx Jackhammers JH55 3ft cubed box sealed under the rear bench seat Pioneer DEH-P6000UB head unit MB Quart FWA 160 components up front Link to comment Share on other sites More sharing options...
NoFearX18 Posted February 10, 2009 Report Share Posted February 10, 2009 I have a kinetik 1400 under there no problem.. an 1800 fits too its just a bit tighter. it fits tho. My Videos AQ + AA/Fi FTMFW!!!!! Link to comment Share on other sites More sharing options...
creyc Posted February 10, 2009 Author Report Share Posted February 10, 2009 Nice to hear the 1800 fits with a bit of effort. I've got one in the back already so I think I'll try stuffing it up front and then go to Deka's or HC2400's in the rear. (Or D3100's if I can find the $$$) 2001 Chevy Blazer (2) SAZ-3000Ds (2) custom 18" Madmax subs in a second row wall Rockford 600-4 Pioneer PRS components Pioneer P800PRS deck Link to comment Share on other sites More sharing options...
Sable Nave Posted February 10, 2009 Report Share Posted February 10, 2009 I would go with the Kinetik Car 1996 Sable LS 8,000K Bi-Xenon HID's Pioneer Premier DEX-P1R Diamond Audio D351, Diamond Audio D362i, Diamond D3TAK off Kicker ZX200.4 Custom 15" 13w7 motor, 3.5" aluminum coils dual 1 ohm off NV-AM25001 Dynamat Dynaliner Second Skin Damplifier Pro Stock 130A Alternator My Build Truck 1995 Ford F-150 Flareside XLT 10,000K Bi-Xenon HID's, 15,000K Bi-Xenon HID's Kicker KS6502, KS400 off Pioneer Premier PRS-D4100F Truck Build Ref(s) Rogers, Jared, Mikesmith0890, Twigz, DHFHades, BASS14, Solo_X18, mrafrica, camino_1to3, kickerassman [speakerman9000] 5:43 pm: if sony sucks so bad how come my amps still work when i had 3 12s on it [capalass23] 11:27 pm: wow u grand man poopin out babys like hto cakes [KevinniveK] can u have sex later please hes helping me Link to comment Share on other sites More sharing options...
soundzright Posted February 10, 2009 Report Share Posted February 10, 2009 why not go for a matching set and go kinetik. Link to comment Share on other sites More sharing options...
creyc Posted February 10, 2009 Author Report Share Posted February 10, 2009 1) they're expensive. 2) dekas are cheeep! 3) I've heard PowerMaster's are hard to top... 2001 Chevy Blazer (2) SAZ-3000Ds (2) custom 18" Madmax subs in a second row wall Rockford 600-4 Pioneer PRS components Pioneer P800PRS deck Link to comment Share on other sites More sharing options...
MECHMAN Posted February 10, 2009 Report Share Posted February 10, 2009 1) they're expensive.2) dekas are cheeep! 3) I've heard PowerMaster's are hard to top... A Powermaster D3400 is a direct bolt-in replacement for Blazer, and they arn't too expensive. 1-888-MECHMAN www.Mechman.com [email protected] Link to comment Share on other sites More sharing options...
soundzright Posted February 10, 2009 Report Share Posted February 10, 2009 you can get deka or 1800 kinetik shipped for between 180-220 brand new. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.