Jextel Posted February 20, 2009 Report Share Posted February 20, 2009 God bless 97 maximas X2 http://www.cardomain.com/ride/3042878TEAM DEADLY HERTZ "GET LOUD OR DIE TRYIN"only the loudest will survive. Link to comment Share on other sites More sharing options...
bobonit Posted February 20, 2009 Author Report Share Posted February 20, 2009 yeah, thats alot of stuff. How big is your trunk?? and what are your plans for the 15's? you gonna tune em low?? or go for spl? The trunk is fairly large, its just that the opening is small. The box will have to slide in from the cabin. 15's will be firing into the cab sealed from trunk, ports mounted in rear deck tuned to 28hz box should be about 6cf net. This will be for low end. 97 Maxima SE Bunch of shit going in, check out the build Build Log Link to comment Share on other sites More sharing options...
Jextel Posted February 20, 2009 Report Share Posted February 20, 2009 The trunk is fairly large, its just that the opening is small. The box will have to slide in from the cabin. 15's will be firing into the cab sealed from trunk, ports mounted in rear deck tuned to 28hz box should be about 6cf net. This will be for low end. yumm...cant wait until this is finished..this makes me wanna go out and get another maxima to to something like this to it.. http://www.cardomain.com/ride/3042878TEAM DEADLY HERTZ "GET LOUD OR DIE TRYIN"only the loudest will survive. Link to comment Share on other sites More sharing options...
bobonit Posted February 24, 2009 Author Report Share Posted February 24, 2009 Small Update: Cut the top panel and glued it in place. Cut the bevels for the front of the enclosure. I'll do the baffle tomorrow. Thats it for today, gotta look for a job. 97 Maxima SE Bunch of shit going in, check out the build Build Log Link to comment Share on other sites More sharing options...
jizazz12 Posted February 24, 2009 Report Share Posted February 24, 2009 coming along nicely , keep the pic's up. 2007 Chevy Impala LS 1 Crescendo 3KWP 1Crescendo C1000/4 2 DC lvl 4 15's with lvl5 dual .7 coils 1Audio Control Matrix 1 Pioneer P880PRS 1 300 amp Iraggi alt All power runs done with Knu flex 0/1 guage 1 optima yellow top under the hood 1 XS 5100 and two Deka's in the trunk 4 Crescendo MP-8 mid bass drivers 2 DB Drive p5 5 D Pro Audio tweeters Link to comment Share on other sites More sharing options...
bobonit Posted February 26, 2009 Author Report Share Posted February 26, 2009 Another update: Made the 1st baffle and mounted. I'm lovin how that Dewalt makes those miter cuts. Fits perfectly !!! Test fit before glueing it in. One end glued and clamped. I used the C-Clamps as stops to rest the baffle against while I used the Bar Clamp to hold it together. By the way, those Jorgenson Cabinet Master Bar Clamps are the Shit !!! After the other end was glued and clamped, I set it at an angle to get a bead of glue in the seam. Tomorrow I hope to get the sides done and maybe get the holes cut for the subs. Then I need to start work on the rear deck. With the stock Bose speakers there, I cannot even do a test fit, the magnets are in the way. I need to pull the deck apart to pull the speakers out so I can do a test fit of the box. While I have it apart, I'll make a template to make a new rear deck to house the ports, E8's and rear stage (for the kids DVD's hehehe) 97 Maxima SE Bunch of shit going in, check out the build Build Log Link to comment Share on other sites More sharing options...
07sOnAtA sp.ed Posted February 27, 2009 Report Share Posted February 27, 2009 Another update: Made the 1st baffle and mounted. I'm lovin how that Dewalt makes those miter cuts. Fits perfectly !!! Test fit before glueing it in. One end glued and clamped. I used the C-Clamps as stops to rest the baffle against while I used the Bar Clamp to hold it together. By the way, those Jorgenson Cabinet Master Bar Clamps are the Shit !!! After the other end was glued and clamped, I set it at an angle to get a bead of glue in the seam. Tomorrow I hope to get the sides done and maybe get the holes cut for the subs. Then I need to start work on the rear deck. With the stock Bose speakers there, I cannot even do a test fit, the magnets are in the way. I need to pull the deck apart to pull the speakers out so I can do a test fit of the box. While I have it apart, I'll make a template to make a new rear deck to house the ports, E8's and rear stage (for the kids DVD's hehehe) man this build just looks crazier and crazier, keep them pics coming, i wanna see you get all this in there CURRENTLY UNDER RE-CONSTRUCTION 2008 Hyundai Sonata Team T3 Audio Team Deadly Hertz Team SMD (Street Motivated Devastation) Link to comment Share on other sites More sharing options...
bobonit Posted February 27, 2009 Author Report Share Posted February 27, 2009 Got a little more work done on the box. I got he bottom corners done. I had to do this to clear the rear strut mounts in the trunk. Next week I hope to get the holes cut, dowels installed and sides done. Then I need to work on the rear deck. 97 Maxima SE Bunch of shit going in, check out the build Build Log Link to comment Share on other sites More sharing options...
bobonit Posted March 2, 2009 Author Report Share Posted March 2, 2009 I got some more work done today. I broke open a couple of new toys I've been dying to use. Porter Cable 895PK Fixed Base / Plunge Router Kit Jasper Jigs from Parts Express All marked up and ready to go Just trying to see how it will look before I make the cut Thats a big bish Jasper Jigs FTMFW!! Never has a perfect hole been so quick and easy to cut 5 minutes after starting... Mmmmm magnet porn 97 Maxima SE Bunch of shit going in, check out the build Build Log Link to comment Share on other sites More sharing options...
fearof85 Posted March 2, 2009 Report Share Posted March 2, 2009 Can't wait to see how this turns out. 28hz should be insane on the lowws. Drew Ref's include: sundownz, army-killa, queball, wildsebring, foshay1123, greenman100, loud-n-low, acex3a, circa40, orangeless, PBateman,xtcxyooj, chaunb3400, oldschoolboomer, SPLluminator Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.