brewer_brewer Posted March 1, 2009 Report Posted March 1, 2009 (edited) i fiberglassed this stinger voltage meter into my fuse cover. i only have one picture of the build up the rest are completed pictures. here it is before the bondo, sanding and painting. i did it yesterday. took me about 6 hours from start to finish. finished. Edited March 1, 2009 by brewer_brewer Quote REFS http://www.caraudioclassifieds.org/forum/itrader.php?u=2026 http://www.stevemeadedesigns.com/board/topic/44535-official-brewer-brewer-feedback/page__p__625998__hl__brewer__fromsearch__1entry625998 "you're not allowing natural selection to work, you're like the guy that invented the seatbelt"
Stephen Posted March 1, 2009 Report Posted March 1, 2009 looks good but i dont like the blue. at all. Quote you can cook bacon shirtless if you're not a pussy...lol not hatin, but am i wrong here it looks as if the amp is not grounded its hooked directly to the battery. it that the way it should be. DC POWER
IH8PunkRok Posted March 1, 2009 Report Posted March 1, 2009 nice placement but im wonderin why it sticks out so much. why didnt u sink it deeper? Quote -Matt2005 Dodge Magnum RTJVC KD-AVX1 2 PPI S580.2 Obsidian Audio ST1 Horn Tweeters PRV 8MB450s Audio Legion 3500.1D 2 RE MT 18s 360 ah LiFePO4 BatterySHCA 2/0 155.2 @ 29 hzKicker CVR 15's buildDD 3512e buildMini T-Line Build(6) 8s BuildNightshade 15s Wall BuildMagnum AB XFL 12s BuildNewest Magnum Build
brewer_brewer Posted March 1, 2009 Author Report Posted March 1, 2009 it sticks out because the lower dash it at such an angle that it has to stick out so i can see it from where i'm sitting. i'll take a pic while i'm sitting so you can see what i'm talking about. Quote REFS http://www.caraudioclassifieds.org/forum/itrader.php?u=2026 http://www.stevemeadedesigns.com/board/topic/44535-official-brewer-brewer-feedback/page__p__625998__hl__brewer__fromsearch__1entry625998 "you're not allowing natural selection to work, you're like the guy that invented the seatbelt"
IH8PunkRok Posted March 1, 2009 Report Posted March 1, 2009 ah i see Quote -Matt2005 Dodge Magnum RTJVC KD-AVX1 2 PPI S580.2 Obsidian Audio ST1 Horn Tweeters PRV 8MB450s Audio Legion 3500.1D 2 RE MT 18s 360 ah LiFePO4 BatterySHCA 2/0 155.2 @ 29 hzKicker CVR 15's buildDD 3512e buildMini T-Line Build(6) 8s BuildNightshade 15s Wall BuildMagnum AB XFL 12s BuildNewest Magnum Build
07sOnAtA sp.ed Posted March 1, 2009 Report Posted March 1, 2009 that is smooth, nice work Quote CURRENTLY UNDER RE-CONSTRUCTION 2008 Hyundai Sonata Team T3 Audio Team Deadly Hertz Team SMD (Street Motivated Devastation)
brewer_brewer Posted March 1, 2009 Author Report Posted March 1, 2009 that is smooth, nice work thanks man. i think i'm gonna try and attempt some fiberglass kick panels like Q-logic has so this was the warm up for that. it's not perfect but it's not bad for my first fiberglass job. Quote REFS http://www.caraudioclassifieds.org/forum/itrader.php?u=2026 http://www.stevemeadedesigns.com/board/topic/44535-official-brewer-brewer-feedback/page__p__625998__hl__brewer__fromsearch__1entry625998 "you're not allowing natural selection to work, you're like the guy that invented the seatbelt"
Chode69 Posted March 1, 2009 Report Posted March 1, 2009 looks good bro...i got a lil advice. if you can get ahold of some 5% tint. then tint the inside of the face plate so you dont get that horrible glare. i did it to mine and gave some to colhon (nofear18) and he likes it too Quote NoFearX18 said: Nick will bang just about anything.....LMAO....pun intended On 4/13/2010 at 9:51 AM, meade916 said: i was like DAMN, Chode is hardcore! he makes james look like a friendly person LOL! trainman0978 said: I dont know who is worse with the buttholes Chode or Big P... Team Deadly Hertz / Team DC Audio / Team XS Power 2010 DC AUDIO MEMBER OF THE YEAR!!! DuckretaryFEAR THE DUCK Durangho Chodes Blowthrough Build Youtube vids Muh Wife Need DC Audio? Hit me up for pricing!!!
brewer_brewer Posted March 1, 2009 Author Report Posted March 1, 2009 looks good bro...i got a lil advice. if you can get ahold of some 5% tint. then tint the inside of the face plate so you dont get that horrible glare. i did it to mine and gave some to colhon (nofear18) and he likes it too i'll try it out. thanks. it's really bright outside today and the door was open that's why it's glared so bad. heres some pictures from the driver seat. Quote REFS http://www.caraudioclassifieds.org/forum/itrader.php?u=2026 http://www.stevemeadedesigns.com/board/topic/44535-official-brewer-brewer-feedback/page__p__625998__hl__brewer__fromsearch__1entry625998 "you're not allowing natural selection to work, you're like the guy that invented the seatbelt"
roscoe1129 Posted March 1, 2009 Report Posted March 1, 2009 Quote Some people need a sympathetic pat... on the head...with my hammer Scientia est Vox "In Nomine Patris et Filii et Spiritus Sancti" DONT BE AFRAID TO USE THE SEARCH BUTTON!!! SMD SUPER BUYER/SELLER
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.