Rogers Posted May 3, 2009 Author Report Share Posted May 3, 2009 UPDATE!... well i got the enclosure assembled... all that is left is cutting the holes out for the woofers, ports, and terminal cup... i plan on getting these holes cut today.... then it will be ready for carpet! here it is! some how i lost 1/8" in width so it will kick my tuning frequency up to around 35.5... i figure it was just due to the blade width while i was cutting... no big deal its still within my range of tuning frequency so im not going to mess with it... comparing the 3" tubing to the 4" tubing http://www.stevemeadedesigns.com/board/topic/79921-rogers-700-dream-car-update-page-17-a-wall/?p=2335774 93 Saturn SC2My system4 SA-15's Walled 2 Cerwin-Vega S2000's 3 Kinetik Hc2000's Dual 200amp alts. you guys done with the peepee touching contest or do I need to end it? Link to comment Share on other sites More sharing options...
Sable Nave Posted May 4, 2009 Report Share Posted May 4, 2009 Looks good man, I still remember the first box... And then what it is now haha Car 1996 Sable LS 8,000K Bi-Xenon HID's Pioneer Premier DEX-P1R Diamond Audio D351, Diamond Audio D362i, Diamond D3TAK off Kicker ZX200.4 Custom 15" 13w7 motor, 3.5" aluminum coils dual 1 ohm off NV-AM25001 Dynamat Dynaliner Second Skin Damplifier Pro Stock 130A Alternator My Build Truck 1995 Ford F-150 Flareside XLT 10,000K Bi-Xenon HID's, 15,000K Bi-Xenon HID's Kicker KS6502, KS400 off Pioneer Premier PRS-D4100F Truck Build Ref(s) Rogers, Jared, Mikesmith0890, Twigz, DHFHades, BASS14, Solo_X18, mrafrica, camino_1to3, kickerassman [speakerman9000] 5:43 pm: if sony sucks so bad how come my amps still work when i had 3 12s on it [capalass23] 11:27 pm: wow u grand man poopin out babys like hto cakes [KevinniveK] can u have sex later please hes helping me Link to comment Share on other sites More sharing options...
Sable Nave Posted May 4, 2009 Report Share Posted May 4, 2009 Lawl here is the first box Before I got ahold of it After I was done with it Car 1996 Sable LS 8,000K Bi-Xenon HID's Pioneer Premier DEX-P1R Diamond Audio D351, Diamond Audio D362i, Diamond D3TAK off Kicker ZX200.4 Custom 15" 13w7 motor, 3.5" aluminum coils dual 1 ohm off NV-AM25001 Dynamat Dynaliner Second Skin Damplifier Pro Stock 130A Alternator My Build Truck 1995 Ford F-150 Flareside XLT 10,000K Bi-Xenon HID's, 15,000K Bi-Xenon HID's Kicker KS6502, KS400 off Pioneer Premier PRS-D4100F Truck Build Ref(s) Rogers, Jared, Mikesmith0890, Twigz, DHFHades, BASS14, Solo_X18, mrafrica, camino_1to3, kickerassman [speakerman9000] 5:43 pm: if sony sucks so bad how come my amps still work when i had 3 12s on it [capalass23] 11:27 pm: wow u grand man poopin out babys like hto cakes [KevinniveK] can u have sex later please hes helping me Link to comment Share on other sites More sharing options...
Rogers Posted May 4, 2009 Author Report Share Posted May 4, 2009 damn nave!!!! you did a number on it for sure! well here is another update.... i got the holes for the subs cut out, aswell as the ports installed... just need to install a terminal cup and carpet it and it will be ready to boom!!! http://www.stevemeadedesigns.com/board/topic/79921-rogers-700-dream-car-update-page-17-a-wall/?p=2335774 93 Saturn SC2My system4 SA-15's Walled 2 Cerwin-Vega S2000's 3 Kinetik Hc2000's Dual 200amp alts. you guys done with the peepee touching contest or do I need to end it? Link to comment Share on other sites More sharing options...
bkolfo4 Posted May 6, 2009 Report Share Posted May 6, 2009 Looks GREAT! Any updates? Played it yet? Just a FYI for next time you build: Make a small area where the ports will be installed double thickness. Cut the OD pipe size in the inner piece, and the ID pipe size in the outer piece. you can then run a roundover bit on the outer piece to get a small flare. It is just enough to really cut down on noise from the sharp edge of the port. Like I did these boxes: Brian Current system: 1997 Blazer - (4) Customer Fi NEO subs with (8) American Bass Elite 2800.1s Previous systems: 2000 Suburban - (4) BTL 15's and (4) IA 40.1's = 157.7 dB at 37 Hz. 1992 Astro Van - (6) BTL 15's and (6) IA 40.1's = 159.7 dB at 43 Hz. Link to comment Share on other sites More sharing options...
king of kings Posted May 24, 2015 Report Share Posted May 24, 2015 hey i been looking at 4) 12 inch sub boxs. i just put together one that is a sealed and divide in 4s. its 36w x 30d x 13h i dont know what it sound like yet, i have been wanting a 28 to 35 hz box. its a 05 chevy malibu car trunk space is 39w x 36d x 17h. have a boss bv7330 320 watt head unit , spl spq-20 pwm 18dB parametric EQ , boss 3000 watt AP 2 channel amp , 2 power caps 1 fad and 2 fad , and 4) new pyle power black PLPW12D 12 inch 3200 watt rms , 6400 watt max power , dual 4 ohm impedance , 60oz magnet , 2.0 in voice coil , SPL 90 dB...... im looking for loud deep bass for competion ... trying to decide which way to go with the sealed one i have now or with the one you been talking bout but 36w x 30d x 13h and 4 pvc 3inch x 9inch long.... any suggestions????????????? Link to comment Share on other sites More sharing options...
Broke_Audio_Addict Posted May 24, 2015 Report Share Posted May 24, 2015 That being said a lot of people's definition of "music" is a clipped 30 hz sine wave with some 80 IQ knuckle head grunting about committing crimes and his genitals. Link to comment Share on other sites More sharing options...
reedal Posted May 24, 2015 Report Share Posted May 24, 2015 hey i been looking at 4) 12 inch sub boxs. i just put together one that is a sealed and divide in 4s. its 36w x 30d x 13h i dont know what it sound like yet, i have been wanting a 28 to 35 hz box. its a 05 chevy malibu car trunk space is 39w x 36d x 17h. have a boss bv7330 320 watt head unit , spl spq-20 pwm 18dB parametric EQ , boss 3000 watt AP 2 channel amp , 2 power caps 1 fad and 2 fad , and 4) new pyle power black PLPW12D 12 inch 3200 watt rms , 6400 watt max power , dual 4 ohm impedance , 60oz magnet , 2.0 in voice coil , SPL 90 dB...... im looking for loud deep bass for competion ... trying to decide which way to go with the sealed one i have now or with the one you been talking bout but 36w x 30d x 13h and 4 pvc 3inch x 9inch long.... any suggestions????????????? Besides the fact that this thread is 6 years old, make your own new thread, and ditch that shit equipment if you "want to compete" as you say. Although I suspect troll. No one is dumb enough to believe in all of that garbage at once. SMD Tool Map https://www.stevemeadedesigns.com/board/topic/193176-smd-tool-map-new-november-2014/ Build log https://www.stevemeadedesigns.com/board/topic/197217-reeds-03-tahoe-hat-sqaq-singer-xs-shca-cockbox-80prs/?page=32 Link to comment Share on other sites More sharing options...
moniker Posted May 30, 2019 Report Share Posted May 30, 2019 This is an old thread, but I had to say I totally know what this guy is going through. When I look at numbers my mind goes BLANK with a side of tension headache. Ask me to combine multiple sets of numbers to come up with some other magic number and I might just implode. The only way i'm getting anything done is if someone does the math for me, produces the cut-sheet, and then I can build the box. I'm good at many things, numbers will just never happen for me though. Link to comment Share on other sites More sharing options...
Bass Wars Posted May 30, 2019 Report Share Posted May 30, 2019 most people say you need 12-16 square inches of port area, what I am trying to figure out is how they arrive at that number. So for my given speaker, I can calculat what cross sectional area I need. Here everyone says your need 12-16 inches per cubic foot, but others say that cross sectional area is only determined by your speaker. so which is it, anyone know? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.