raytard Posted April 25, 2009 Report Share Posted April 25, 2009 epic megalomaniac, lol you get what you pay for, and one of the cheapest deadeners isnt going to work any better than one of the cheapest sets of speakers yea, it may do what is supposed to, but it wont do it well, and it wont do it for long Quote Build: http://www.stevemeadedesigns.com/board/ind...hl=avalon+build monster/rockford/kicker/stinger cables, pioneer source, jbl highs/amps, kinetik/shuriken batts, iraggi alt, dei security, dc subs(atleast for now) Team DC Link to comment Share on other sites More sharing options...
siucsaluki11 Posted April 25, 2009 Report Share Posted April 25, 2009 PS. be prepared to have that 'tar smell' lingering around your ride for a few good days. I used hushmat in mine, sticks like a mofo, no smell. I love it Quote woman..cant live with em...cant shoot em...guess were all fucked You might be a Redneck if you use your leftover gutters for a speaker box port... YOU JUST LOST THE GAMER.I.P. Blazer=========================Last setup was in the 141s on music (37hz) with 2 12s and 1kw in a 4dr blazer.2010 Mitsubishi Lancer DE2 12in Clarions (kept from blazer)HiFonics BRZ1700.1d (at 2 ohms BLOWN) [JBL GTS180X for subs currently 60wRMS x2ch!!!!!! This works for till i get the blown amp fixed] Alpine 4ch salvaged from blazer (currently near death)9887 peerless 7s in the doors and CDT tweeters ran active no speakers in the rearKintik HC1400 under the hood.metered once a while ago, dont remember it...was piss poor compared to the blazer, mid 130s i think....looking to replace subs and amp when i have money. Link to comment Share on other sites More sharing options...
ryde2idie Posted April 25, 2009 Report Share Posted April 25, 2009 (edited) fatmat worked just fine for me, it sticks very well wen the surface is clean, and i have no rattles. we even had to peel it back up to weld a little and the shit was not coming off so we hit it with a cutoff wheel. and as for the smell, i rode around for weeks with the smell of fiberglass in the car from doing the box, i can deal with a little tar. Edited April 25, 2009 by ryde2idie Quote Quote Link to comment Share on other sites More sharing options...
moh.vze.com Posted April 26, 2009 Report Share Posted April 26, 2009 Dude. Don't waste your time putting that in your car. I had a bunch of fatmat under my trunk lid and 1.5 years later when I took off the plastic panel, I saw pieces of fatmat hanging... I had to take it all off and put eDead vse3. Trust me, don't waste your time with fatmat. You should try and sell it -.- Quote DC Audio - Singer Alternators - Knukonceptz - XS Power - Hybrid Audio - Rockford Fosgate - Second Skin Audio - SMD - Sundown Audio - Elemental Designs Link to comment Share on other sites More sharing options...
RamenNoodles Posted April 27, 2009 Report Share Posted April 27, 2009 FatMat sucks. Period. I cleaned the surface with alcohol, and used a torch with a roller, yet its still falling off. Quote Diablo Audio Technologies Fi Car Audio Ascendant Audio Link to comment Share on other sites More sharing options...
wL<3bass Posted April 27, 2009 Report Share Posted April 27, 2009 FatMat sucks. Period.I cleaned the surface with alcohol, and used a torch with a roller, yet its still falling off. Sell it if you can and get some raammat or other quality deadener (dynamt xtreme, second skin, hushmat, stinger, etc.) that is BUTYL rubber based. Quote Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references... Link to comment Share on other sites More sharing options...
dwz Posted April 27, 2009 Report Share Posted April 27, 2009 Sell that shit fast and get you some Dynamat Extreme, Second Skin (this should be your #1 choice), or eDead. As long as it's butyl based my man. Dynamat Extreme for example can be used without a heat gun and is damn near impossible to get off once you use a roller. Quote Link to comment Share on other sites More sharing options...
Joeskey Posted April 27, 2009 Report Share Posted April 27, 2009 Get some Second skin ftw =] Quote "never drive faster then your guardian angel flies... good think my guardian angel drives a twin turbo ed beast" "its time has come for those who are different to stand united" Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.