Dr. Johnson Posted April 26, 2009 Report Posted April 26, 2009 Does anyone know the cut out Diameter of the E8's ? Thanks for the help. D Quote
Stephen Posted April 26, 2009 Report Posted April 26, 2009 # Rated RMS Power = 200 watts # Mounting Depth = 4.25" # Outside Dia. w/gasket = 8 5/16" # Inside Dia. 7.000" # Sealed Box: 0.280 ft^3 w/ F3 of 50 Hz (Qtc = 0.707) # Ported Box: 0.60 ft^3 tuned to 30 Hz F3 of 25 Hz Quote you can cook bacon shirtless if you're not a pussy...lol not hatin, but am i wrong here it looks as if the amp is not grounded its hooked directly to the battery. it that the way it should be. DC POWER
zfrerichs Posted April 26, 2009 Report Posted April 26, 2009 i like to go 8 1/2 to 9 to flush mount them Quote Roseville, CA
Dr. Johnson Posted April 26, 2009 Author Report Posted April 26, 2009 i like to go 8 1/2 to 9 to flush mount them So YOU would cut the hole 8.5-9 inches? lol uhh no thanks I can measure the out side just fine I wanted to know the inner cut out. Stephan I saw that on the website but was not 100% sure that is the cut out are you? Quote
zfrerichs Posted April 26, 2009 Report Posted April 26, 2009 i thought i read od lol my bad reading > me but 7 is perfect for the cutout Quote Roseville, CA
Torres Posted April 26, 2009 Report Posted April 26, 2009 yep 7" is the inner diameter. if you're iffy on it, cut it maybe 7 1/8 inch or so. my jasper jig was a lil off cuz it was broken, so i gut it about 1/8" bigger on the radius (i think lol...i need a new jig) Quote
tibs Posted April 26, 2009 Report Posted April 26, 2009 they say go 7.. and if it is tight just use a round over on it.. Quote Tibs 99 F-150 Build 8 twelves 8 - Re SE 12"s 2 - SunDown Audio Saz-3000d's 1 - vx4004 planet audio amp big 3 1/0 gauge MECHMAN 250 amp alt MySpace
Dr. Johnson Posted April 26, 2009 Author Report Posted April 26, 2009 I have a brand new jasper jig set I am going to use. So I guess I will go with 7. Have a great night and thanks for the help Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.