Sketch Idea: T-line 4 Re Audio Sx 18s

[quakecitystudio]

(4) RE Audio SX 18’s

T-line wall

The port area: 1,017.36

T-line size: 16” x 60”

T-line Length: 8.3 ft

T-line freq: 34hz

The triangle portions have side walls

The back woofer chamber is: d 19” x w 17.5 x h (short) 52.5 long 60”

The chamber area of the back of the woofers can be sealed with a thick Plexiglas so that the waves from the back of the woofers do not affect those from the front.

What do you think?

Edited May 19, 2009 by quakecitystudio

[18inchjeepin]

is there enough cleance for magnets and such?

[quakecitystudio]

yes. the first is a scaled down version of the actual measurements of the subs and the wall.

[zfrerichs]

looks like the tuning will be super high and you may have a loading issue but i can only see the bottom pic so i dont know what you have on the inside

[BanginOnABudget]

looks dumb as hell IMO.

[Guest]

but if built right it would be SOTM no doubt. and sound super nice too

[Sampsonite]

I don't see this working out right. How is this considered a tline? From the secone pic it almost looks like a folded horn... Probably tuned VERY high.

Props to you for being creative! Try again

[Torres]

i dont see it working at all honestly

[quakecitystudio]

it's a t-line with the 4 18s firing into an 8 ft chamber that has a port area that's equal to the 4 subs. where's the subs are mounted, it would be a sealed chamber so only the wavelengths from the line would be apparent. The line is tuned to 34 hz.

[quakecitystudio]

if it was tuned high, the t-lin length would be really short, like 4 feet.