lanman31337 Posted June 9, 2009 Report Share Posted June 9, 2009 So here's what I have: 250 amp alternator with external regulator, big 3 done in 1/0. I have the regulator's ground right to the front battery, field of course to the field of the alternator, and ignition underneath my dash to the ignition switch ignition wire. As soon as my car is running, all of my lights pulsate. When I rev it, they pulsate faster. Of course I get tons of noise and it goes faster when I rev it when I have my system hooked up. Bad alternator? Quote 2 - Audiopipe AP30001Ds 1 - Lanzar Opti Scion 600.4 4 - Lanzar Optidrive 1232D's 1 - Lanzar Opti 5.1 1 - Lanzar Opti 6.1 1 - Lanzar Opti 6C midbass 1 - Alphasonic PCT6551 1 - Lanzar VX830 1 - JBL 22 band EQ 1 - Lanzar SDBT75NU 1 - AudioControl Epic160 Link to comment Share on other sites More sharing options...
Guest Posted June 9, 2009 Report Share Posted June 9, 2009 try grounding it to a piece of bare metal (you can grind off painted metal if you need to) inside your engine bay somewhere. instead of the battery Quote Link to comment Share on other sites More sharing options...
lanman31337 Posted June 9, 2009 Author Report Share Posted June 9, 2009 (edited) What would that do? I have my alternator grounded to bare metal on the body of the car, as well as from the battery the negative connects to one of my transmission bolts, and then to my shock tower. Voltage is good, so it's not a voltage drop. Edited June 9, 2009 by lanman31337 Quote 2 - Audiopipe AP30001Ds 1 - Lanzar Opti Scion 600.4 4 - Lanzar Optidrive 1232D's 1 - Lanzar Opti 5.1 1 - Lanzar Opti 6.1 1 - Lanzar Opti 6C midbass 1 - Alphasonic PCT6551 1 - Lanzar VX830 1 - JBL 22 band EQ 1 - Lanzar SDBT75NU 1 - AudioControl Epic160 Link to comment Share on other sites More sharing options...
vaughn Posted June 9, 2009 Report Share Posted June 9, 2009 yeah, definitely ground it to bare metal. I don't think I've heard of grounding directly to the battery? Then again, I'm somewhat new to the scene Quote *your mom* <- your mom is my signature! daaaaaaang! Link to comment Share on other sites More sharing options...
lanman31337 Posted June 9, 2009 Author Report Share Posted June 9, 2009 Where do you think it eventually goes? To the battery. IT IS GROUNDED, grounds are not the problem. Quote 2 - Audiopipe AP30001Ds 1 - Lanzar Opti Scion 600.4 4 - Lanzar Optidrive 1232D's 1 - Lanzar Opti 5.1 1 - Lanzar Opti 6.1 1 - Lanzar Opti 6C midbass 1 - Alphasonic PCT6551 1 - Lanzar VX830 1 - JBL 22 band EQ 1 - Lanzar SDBT75NU 1 - AudioControl Epic160 Link to comment Share on other sites More sharing options...
pstone11 Posted June 9, 2009 Report Share Posted June 9, 2009 Where do you think it eventually goes? To the battery. IT IS GROUNDED, grounds are not the problem. Try hooking the ignition wire of the reg. to the battery, just to troubleshoot a little. I've had some ignition wires under the dash in my truck act really funny. If it works, just pick a new ignition wire, or use a relay and leave it hooked right to the battery. Quote Check out StoneSounds to see my recent builds.Or look at the Flying White Facebook Page! Link to comment Share on other sites More sharing options...
n8ball2013 Posted June 9, 2009 Report Share Posted June 9, 2009 Where do you think it eventually goes? To the battery. IT IS GROUNDED, grounds are not the problem. its newbs who have read somewhere about bad grounds causing noise and think thats all that it could be. Jeff whats your voltage sit at. Does it fluctuate? I'm curious but Im wondering if you are getting enough juice from that ignition wire or possible bad regulator. Quote THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger. Link to comment Share on other sites More sharing options...
lanman31337 Posted June 9, 2009 Author Report Share Posted June 9, 2009 Since I have an adjustable regulator, I turned it all the way down. It sits at 14.4. Doesn't move more than that. That's warmed up. If I turn it up to 15, it sits at 15. Lights pulsate/radio noise at any and all voltage levels. PStone11 - good call. I'll give that a try when I get home. It could be some ignition noise. I have a fuse block that I ran into the car that has my solenoids for my doors and trunk hooked up, as well as the radio main power. I'll drop a fuse into my spare slot and hook up the regulator into that. And also before anyone asks, I have the radio hooked up to the battery, same with the ground of it as well. Quote 2 - Audiopipe AP30001Ds 1 - Lanzar Opti Scion 600.4 4 - Lanzar Optidrive 1232D's 1 - Lanzar Opti 5.1 1 - Lanzar Opti 6.1 1 - Lanzar Opti 6C midbass 1 - Alphasonic PCT6551 1 - Lanzar VX830 1 - JBL 22 band EQ 1 - Lanzar SDBT75NU 1 - AudioControl Epic160 Link to comment Share on other sites More sharing options...
Bigg Boy Posted June 9, 2009 Report Share Posted June 9, 2009 You have to ground regulators? I have no ground wire or lug on mine, this could be why mine is doing the same thing? Quote Dodge Magnum with custom 300c front end, laid out on air bags *4) 12" Cadence Daytona walled *1) AudioQue 20k *270a DC Power Alt (Dual coming soon) Link to comment Share on other sites More sharing options...
lanman31337 Posted June 9, 2009 Author Report Share Posted June 9, 2009 My external has field, pos and neg. Neg goes to a good ground of course, field goes to the alternator, and pos goes to ignition. Quote 2 - Audiopipe AP30001Ds 1 - Lanzar Opti Scion 600.4 4 - Lanzar Optidrive 1232D's 1 - Lanzar Opti 5.1 1 - Lanzar Opti 6.1 1 - Lanzar Opti 6C midbass 1 - Alphasonic PCT6551 1 - Lanzar VX830 1 - JBL 22 band EQ 1 - Lanzar SDBT75NU 1 - AudioControl Epic160 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.