Lowroll Posted June 30, 2009 Report Share Posted June 30, 2009 I have no idea. Im looking online and I cant find anything. I have an idea though if you have some time to play with box designs. Quote Current System: Pioneer 6900 HU Front Stage: (for now) Soundstream tarantula 5.25 in the doors Soundstream tarantula 4x6 in the dash Kenwood 400.4 for mids & highs Bass: 4 Soundstream RW-12's 2 Power Acoustik Stax 4000/1D's single chamber box, 2.65 cubes. Currently under the knife being bagged Rebuilding err'thang Link to comment Share on other sites More sharing options...
Hotdog Posted June 30, 2009 Author Report Share Posted June 30, 2009 (edited) I found it... this is the exact woofer Mine is the 4 ohm Now this said 300 RMS but the guy I bout it from said he had a 1000 watt Alpine amp on these and they handled fine. Edited June 30, 2009 by Hotdog Quote (NEW) 2004 F-150 Build Log -->http://www.stevemeadedesigns.com/board/topic/192208-hotdogs-f-150-build-log/ 2003 Mercury Mountaineer Build Log --> http://www.stevemeadedesigns.com/board/topic/114380-hotdogs-2003-mountaineer-build-log-20-removed/page__gopid__1602379#entry1602379 2008 Equinox Build Log --> http://www.stevemead...g/#entry1475764 Link to comment Share on other sites More sharing options...
Lowroll Posted June 30, 2009 Report Share Posted June 30, 2009 Very nice. now lets see a new box for those subs and a vid too. Quote Current System: Pioneer 6900 HU Front Stage: (for now) Soundstream tarantula 5.25 in the doors Soundstream tarantula 4x6 in the dash Kenwood 400.4 for mids & highs Bass: 4 Soundstream RW-12's 2 Power Acoustik Stax 4000/1D's single chamber box, 2.65 cubes. Currently under the knife being bagged Rebuilding err'thang Link to comment Share on other sites More sharing options...
Hotdog Posted June 30, 2009 Author Report Share Posted June 30, 2009 According to Vas it should be 2.084 So I should be alright with 2.1 or 2.2 will it make that big of a difference. This may be a dumb question but I had to ask Company: Rockford Fosgate Corp. Model: RFR-1410 Available = No Last update: 14-Nov-1996 Type: Standard one-way driver Comment: Punch series Shape: Round Piston Type: Cone Piston: Black spruce paper pulp cone Suspension: Santoprene rubber surround Frame: Cast aluminum Voice Coil: Diameter-3 in coil on Black Aluminum former Fs = 28 Hz Qms = 2.38 Vas = 2.084 cu.ft Cms = 0.0595 in/lb Mms = 3.175 oz Xmax = 0.303 in Sd = 54.25 sq.in Qes = 0.32 Re = 3.7 ohms Le = 1 mH Z = 4 ohms BL = 3.08 lb/A Pe = 300 watts Qts = 0.28 1-W SPL = 88 dB Acoustic data: Not present Quote (NEW) 2004 F-150 Build Log -->http://www.stevemeadedesigns.com/board/topic/192208-hotdogs-f-150-build-log/ 2003 Mercury Mountaineer Build Log --> http://www.stevemeadedesigns.com/board/topic/114380-hotdogs-2003-mountaineer-build-log-20-removed/page__gopid__1602379#entry1602379 2008 Equinox Build Log --> http://www.stevemead...g/#entry1475764 Link to comment Share on other sites More sharing options...
Lowroll Posted June 30, 2009 Report Share Posted June 30, 2009 Yeah it should be fine. You gonna change the freq? 33hz seems a little low to me. Quote Current System: Pioneer 6900 HU Front Stage: (for now) Soundstream tarantula 5.25 in the doors Soundstream tarantula 4x6 in the dash Kenwood 400.4 for mids & highs Bass: 4 Soundstream RW-12's 2 Power Acoustik Stax 4000/1D's single chamber box, 2.65 cubes. Currently under the knife being bagged Rebuilding err'thang Link to comment Share on other sites More sharing options...
Hotdog Posted June 30, 2009 Author Report Share Posted June 30, 2009 What would be the best way of changing the tuning of This box? This is a view of the port Maybe it would be best to leave this box for the 12's and make a new one for the 10's What would be a good tune for 10's Keep in mind I love having low end but I like a good punch to my Rock n Roll too Quote (NEW) 2004 F-150 Build Log -->http://www.stevemeadedesigns.com/board/topic/192208-hotdogs-f-150-build-log/ 2003 Mercury Mountaineer Build Log --> http://www.stevemeadedesigns.com/board/topic/114380-hotdogs-2003-mountaineer-build-log-20-removed/page__gopid__1602379#entry1602379 2008 Equinox Build Log --> http://www.stevemead...g/#entry1475764 Link to comment Share on other sites More sharing options...
Beanz Posted June 30, 2009 Report Share Posted June 30, 2009 id say tune the box to 35 hz.good for musical and you could run that 500 rms granted it was clean unclipped power. Quote That's why they don't deliver. Yer ass better go sit along the side of the road and wait. You can't expect them to travel up some dirt road in a hick / back woods town. Thats how horror movies start I explain things very simply and use analogies in terms of Pickles, and grape drink, pool noodles and jackhammers...if you can't put 2 and 2 together there man, There simply is not much more I can do. Link to comment Share on other sites More sharing options...
Hotdog Posted June 30, 2009 Author Report Share Posted June 30, 2009 (edited) id say tune the box to 35 hz.good for musical and you could run that 500 rms granted it was clean unclipped power. It is tuned at 33hz now Would 2hz make that big of a difference? I know this may be a stupid question.. But I have to know Sweet that is good news... I will just keep the gains all the way down and keep my hands off of the Tuners bass control for subs. my other option is 2 - 10's and 2- 12's but I though I would be better off with just pushing the 2 ten's hard. I dont thing the P2 12's can handel the Rockford Fosgate T10001bd... what do you think? I could just take out my L2 on the port and that would be right at 35hz Edited June 30, 2009 by Hotdog Quote (NEW) 2004 F-150 Build Log -->http://www.stevemeadedesigns.com/board/topic/192208-hotdogs-f-150-build-log/ 2003 Mercury Mountaineer Build Log --> http://www.stevemeadedesigns.com/board/topic/114380-hotdogs-2003-mountaineer-build-log-20-removed/page__gopid__1602379#entry1602379 2008 Equinox Build Log --> http://www.stevemead...g/#entry1475764 Link to comment Share on other sites More sharing options...
lowblueranger Posted June 30, 2009 Report Share Posted June 30, 2009 P2's would not be good on a T10001-too much power for those subs unless you only run it at 4 ohms? I have T2 10's in a ported box tuned to 34 with 1.5 ft per sub and they are really loud off a T20001. I would make a smaller box for your 10's and run the T10001 to them. Quote Alpine INA-W900 Rockford Fosgate Punch 200ix Rockford Fosgate power T1500-1 Sundown SA-10 x2 Focal 6x8's front Rockford Fosgate Power T1682 rear Rockford Fosgate and Stinger Wiring Powermaster D3400, S680 Link to comment Share on other sites More sharing options...
Hotdog Posted June 30, 2009 Author Report Share Posted June 30, 2009 P2's would not be good on a T10001-too much power for those subs unless you only run it at 4 ohms? I have T2 10's in a ported box tuned to 34 with 1.5 ft per sub and they are really loud off a T20001. I would make a smaller box for your 10's and run the T10001 to them. What are the dimensions of your box... Pics? Thank you Quote (NEW) 2004 F-150 Build Log -->http://www.stevemeadedesigns.com/board/topic/192208-hotdogs-f-150-build-log/ 2003 Mercury Mountaineer Build Log --> http://www.stevemeadedesigns.com/board/topic/114380-hotdogs-2003-mountaineer-build-log-20-removed/page__gopid__1602379#entry1602379 2008 Equinox Build Log --> http://www.stevemead...g/#entry1475764 Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.