How Many?

[Boon]

alright, sorry if i sound snobby, but once again, I'M NOT DESIGNING THE BOX!!!!!!! if you wish, you can design a 4 12" slot port box design for 4 12" HFI12D4 subwoofers. i am not doing the round port. idc if that's what they tell me to do. so if you want to design me a box for 4 12's that is slot port, please do and i will use that.

K. If only because it stops you trying to make a stupid iso-bandpass box.

Maximum dimensions, vehicle, any particular requirements?

I'm going to get on the piss bigtime tonight so it'll have to be tomorrow.

[BassAddict32]

K. If only because it stops you trying to make a stupid iso-bandpass box.

Maximum dimensions, vehicle, any particular requirements?

I'm going to get on the piss bigtime tonight so it'll have to be tomorrow.

wow. O.O okay man. umm....3 feet wide, 3 feet tall, by 3 feet long. i can go a bit higher if need be. after all, it is a minivan.

thanks in advance man. and sorry about eariler.

EDIT: it's a 2001 dodge grand caravan sport. i'm taking out the third row seats. and not low tuning. maybe 33HZ?

Edited July 31, 2009 by BassAddict32

[BassAddict32]

so i thought about things, and i realized that 4 dual VC 4OHM subs will get a 2OHM load. with a mono amp, i'd get less. so with a 1600W amp (BXI1606D) i'd end up getting about 1100W. so i thought, why not just run 2 amps? so does anyone think i should run 2 Crunch PZI1000.1 amps? i think it'd be better. grant it, i don't think they put out 1K watts, but that's okay because the subwoofers only handle 600W peak and i don't want to put to much. i just think that each amp to 2 subwoofers would be a good idea. any thoughts?

[ISO]

Kicker highly does not recommend useing SOLO's in an IsO-Baric set up.

I have long talks about it with Kicker as my original plan was 2 RF 1501BS 0n 4 L7s in iso-baric formation and they shot me down hard.

It can be down but the Techs sayed that it usually sound pretty bad. Hence my screen name ISO I love the concept of running iso-baric.

No you don't need 2 amps to make a push pull config you just need to know how to wire your subs.

Sorry for the bad news.

[BassAddict32]

Kicker highly does not recommend useing SOLO's in an IsO-Baric set up.

I have long talks about it with Kicker as my original plan was 2 RF 1501BS 0n 4 L7s in iso-baric formation and they shot me down hard.

It can be down but the Techs sayed that it usually sound pretty bad. Hence my screen name ISO I love the concept of running iso-baric.

No you don't need 2 amps to make a push pull config you just need to know how to wire your subs.

Sorry for the bad news.

okay, i'm not using kicker. but the 2 amps will not runng be running them iso if boon will make me a box.

[BassAddict32]

okay, let me rephrase that and explain......

i will not be running kickers at all, so i do not have to worry about that. now, as for iso style, if boon will make me a box for my 4 12's, then i will not use iso. if he does not, then iso it will be. either way, i will be using 2 seperate amps. dual VC 4OHM X 4 = a 2OHM load. so if i use 2 amps, i can get a 1OHM load to each amp, pushing it full power. hopefully 400W to each.

let me see how things work out with boon before i pick iso or not. either way, i will be using 2 seperate amps.

[Team_DC-Derrick]

get the gear first, then worry about the box after that LOL, always with the *im gonna get this and that* Buy it build it, blow shit up with it

either way, your moms van will be loud

[BassAddict32]

get the gear first, then worry about the box after that LOL, always with the *im gonna get this and that* Buy it build it, blow shit up with it

either way, your moms van will be loud

lol. well i change things because i can't decide. however, the amps i'm sure with, because it'd make more sense. and i know what subs i'm getting. just the box is a issue. but i should have things going, once i sell some stuff. that'll be soon.