bigg_will Posted April 9, 2007 Report Share Posted April 9, 2007 alright, so by the end of the month i should be ordering my fully loaded btl and i was wondering if the amp is going to be able to push out enough power. i know that the btl can take 2000 rms, but my amp is pushing 1200 rms. is the amp going to be pushing the sub enough so that its pretty loud until i buy my new one? 2002 Chevy Blazer 2 door 1-18" Fi BTL, 1 T2000.1bd, 8 ft box before displacement tuned to 33Hz, Big 3 done in 1/0 Havent been metered yet Link to comment Share on other sites More sharing options...
Derrick824 Posted April 9, 2007 Report Share Posted April 9, 2007 alright, so by the end of the month i should be ordering my fully loaded btl and i was wondering if the amp is going to be able to push out enough power. i know that the btl can take 2000 rms, but my amp is pushing 1200 rms. is the amp going to be pushing the sub enough so that its pretty loud until i buy my new one? No its not worthy. I reckon it'll get you by but it won't even be close to its potential. You'll need closer to 3000watts for a loaded BTL. Link to comment Share on other sites More sharing options...
KickerAudio21 Posted April 9, 2007 Report Share Posted April 9, 2007 YEah, the 1200d only puts out like 1050 at best i think. It pushes my L7 15" pretty well, but i'm wishing I would have bought the 1600, because it hits distortion before the sub is at it's fullest potential. It's a great amp, but not powerfull enough for your application, you'd want the bxi2006d if you go hifonics ------------------------------------------------- 1st place circuit city car/spl show (maplewood,MN) 2006 146.6 dB's with 2 12" L7 and 1606d brutus Link to comment Share on other sites More sharing options...
bigg_will Posted April 9, 2007 Author Report Share Posted April 9, 2007 alright cool, i guess im now going to have to save up on a new amp... im probly gonna go with a bxi2006D unless if i find a nicer paying job than mcdonalds 2002 Chevy Blazer 2 door 1-18" Fi BTL, 1 T2000.1bd, 8 ft box before displacement tuned to 33Hz, Big 3 done in 1/0 Havent been metered yet Link to comment Share on other sites More sharing options...
bigg_will Posted April 10, 2007 Author Report Share Posted April 10, 2007 so what im going to do right now is buy another bx1205d so i can have one per coil and then after a while im going to get a t2000. 2002 Chevy Blazer 2 door 1-18" Fi BTL, 1 T2000.1bd, 8 ft box before displacement tuned to 33Hz, Big 3 done in 1/0 Havent been metered yet Link to comment Share on other sites More sharing options...
Derrick824 Posted April 10, 2007 Report Share Posted April 10, 2007 so what im going to do right now is buy another bx1205d so i can have one per coil and then after a while im going to get a t2000. So since you're going to run a pair of the bx1205d's then you're getting a dual 1ohm sub, correct? If so then how do you plan to wire up a T20001bd? You'll need a dual 2ohm sub for that one. Link to comment Share on other sites More sharing options...
Slinky Posted April 10, 2007 Report Share Posted April 10, 2007 yeah, just wait and save up for the bigger amp and get the dual 2 ohm sub DD M4 Rockford Fosgate P500-4 SoundQubed HDC415 w carbon fiber cap 2 Rockford Fosagate T1675-S XS Power D3400 Under Hood XS Power D5100 in rear Michael Singer 200A Alt Build Log: http://www.stevemeadedesigns.com/board/topic/153901-2012-veloster-update-842013-wall-build-4-15s/ Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.