huesos Posted September 17, 2009 Report Share Posted September 17, 2009 Hello there, This build may not be much because it is my first build and most of the work will be done by my, with me going off the knowlege I have learned on this forum. Had a a few system before, but nothing serious, just smaller, lower power stuff, all installed with amp kits and prefab boxes. My goals outta this is a 145 out of my trunk, and to gain as much knowledge and experience as possible, comments or suggestions appreciated. All will be done in a 1994 Pontiac Bonneville, I am on a sort of budget retriction due to the fact that I am tryin to finish my senior year, work alot and have a sperate sport I compete in which takes up the majority of my time, but any way. O and I am also somewhat limited on my tools lol. The Equipment: 1 Orion HCCA 15.2 3.9 cubes @ around 35 hertz 40ft of knukonceptz 1/0 Monster RCA's Amp will more than likely be MB QUART DSC1500.1D Battery is undecided, either a Kinetik HC 800 or SHURiKEN SK-BT60 Other Task: Falsle floor Amp rack Big 3 Orion HCCA 15.2- This thing is fuckin beastly... This is how I had to move it around, Im 5'9" 200lb bodybuilder n i still got tired taking it from my room to my garage then to my car lol. This is the hcca next to my old 15" pa mofo, i though the mofo was big when i got so the orion blow my mind lol "FRIENDS MAY COME AND GO BUT 200 POUNDS WILL ALWAYS BE 200 POUNDS." -System in progress- SYSTEM SHOULD BE DONE BY THIS MONDAY!!!!!! 15.2 Orion HCCA 4 Cubic ft tuned to low 30's MB Quart DSC1500.1D Kinetik HC1800 Kinetik HC800 50ft of KnuKonceptz 1/0 gauge 10ft Kicker 4 gauge "LET THE PAIN COME OVER YOU, BUT NEVER LET THE PAIN OVERCOME YOU." Link to comment Share on other sites More sharing options...
tehbert0 Posted September 17, 2009 Report Share Posted September 17, 2009 do work. thats a beautiful subwoofer http://motorcitydesignsaudio.com Link to comment Share on other sites More sharing options...
huesos Posted September 17, 2009 Author Report Share Posted September 17, 2009 do work. thats a beautiful subwoofer Def is, hell im still in awe of it. "FRIENDS MAY COME AND GO BUT 200 POUNDS WILL ALWAYS BE 200 POUNDS." -System in progress- SYSTEM SHOULD BE DONE BY THIS MONDAY!!!!!! 15.2 Orion HCCA 4 Cubic ft tuned to low 30's MB Quart DSC1500.1D Kinetik HC1800 Kinetik HC800 50ft of KnuKonceptz 1/0 gauge 10ft Kicker 4 gauge "LET THE PAIN COME OVER YOU, BUT NEVER LET THE PAIN OVERCOME YOU." Link to comment Share on other sites More sharing options...
BanginOnABudget Posted September 17, 2009 Report Share Posted September 17, 2009 35 hz? why not 32? :[ im taking out my passenger seat, battery is disconnected, going to unwire and take out the three amps, take out the 70+ lb box, then the platform so i can crimp 1 wire. Almost as bad as those fegs that put those horns in their grills and roll down the street distorting the block.... 1990 Jeep Cherokee 2 Dr. Big-3 in 0g on Stock Alt. Pioneer 6.5" and 5.25"s temp. until i can afford the new crescendos. Pioneer 6000ub Reciever NO amps at the moment. SA-15 on 1kw coming soon. MSG Me for a free enclosure design!! Flared port kits coming soon!! Link to comment Share on other sites More sharing options...
hondaonchrome Posted September 17, 2009 Report Share Posted September 17, 2009 Nice sub......cant wait to see it finished.You might want to get a bigger amp though these subs can take massive amounts of power.You can put 2500rms easily on one of these....... Link to comment Share on other sites More sharing options...
cracker Posted September 17, 2009 Report Share Posted September 17, 2009 yessir it begins huh bracing will be your buddy when time to build a box for that beast. im tuned in mang, any help with the bonne let me know, ill help with what i can for sure March 2010 SOTM winner my old buildhttp://www.stevemeadedesigns.com/board/topic/50219-dank-aka-crackers-bonne-new-v2-build-in-the-works-hahahaaaaaa/page__hl__crackers my youtube page - http://www.youtube.com/profile?user=jackiedan04#g/u my feedback - http://www.stevemeadedesigns.com/board/topic/56540-official-cracker-feedback/ i need tacos and bass to live!!!!! and will NEVER change hahaaaa TEAM NOIZE VIOLATION Link to comment Share on other sites More sharing options...
huesos Posted September 17, 2009 Author Report Share Posted September 17, 2009 35 hz? why not 32? :[believe me man if i had knew a bit more when the sub was built it would have been lower but the box was built mostly by my friend, he did a awsome job, except some corners lol Cracker- although it does need touch up work, the orion hcca will def be heaveir so i will need to brace it, i already had to shave a inch from the hole to get the huge basket or the orion in the, the mofo 15 fit fine before lol. "FRIENDS MAY COME AND GO BUT 200 POUNDS WILL ALWAYS BE 200 POUNDS." -System in progress- SYSTEM SHOULD BE DONE BY THIS MONDAY!!!!!! 15.2 Orion HCCA 4 Cubic ft tuned to low 30's MB Quart DSC1500.1D Kinetik HC1800 Kinetik HC800 50ft of KnuKonceptz 1/0 gauge 10ft Kicker 4 gauge "LET THE PAIN COME OVER YOU, BUT NEVER LET THE PAIN OVERCOME YOU." Link to comment Share on other sites More sharing options...
huesos Posted September 17, 2009 Author Report Share Posted September 17, 2009 Nice sub......cant wait to see it finished.You might want to get a bigger amp though these subs can take massive amounts of power.You can put 2500rms easily on one of these....... aww man i def would love that but im am on a sort of budget, dont get me wrong if i find another, reliable, more powerfull amp close to what i am gonna pay for the mb quart then u bet ur ass id love to take it lol. but more amps means more power, bigger bats, alt ect. not sure what my budget will b like. "FRIENDS MAY COME AND GO BUT 200 POUNDS WILL ALWAYS BE 200 POUNDS." -System in progress- SYSTEM SHOULD BE DONE BY THIS MONDAY!!!!!! 15.2 Orion HCCA 4 Cubic ft tuned to low 30's MB Quart DSC1500.1D Kinetik HC1800 Kinetik HC800 50ft of KnuKonceptz 1/0 gauge 10ft Kicker 4 gauge "LET THE PAIN COME OVER YOU, BUT NEVER LET THE PAIN OVERCOME YOU." Link to comment Share on other sites More sharing options...
huesos Posted September 17, 2009 Author Report Share Posted September 17, 2009 yessir it begins huh bracing will be your buddy when time to build a box for that beast. im tuned in mang, any help with the bonne let me know, ill help with what i can for sure yup, Box will be braced fo sho that hcca is not light, n thanks for gettin ma back bro "FRIENDS MAY COME AND GO BUT 200 POUNDS WILL ALWAYS BE 200 POUNDS." -System in progress- SYSTEM SHOULD BE DONE BY THIS MONDAY!!!!!! 15.2 Orion HCCA 4 Cubic ft tuned to low 30's MB Quart DSC1500.1D Kinetik HC1800 Kinetik HC800 50ft of KnuKonceptz 1/0 gauge 10ft Kicker 4 gauge "LET THE PAIN COME OVER YOU, BUT NEVER LET THE PAIN OVERCOME YOU." Link to comment Share on other sites More sharing options...
huesos Posted September 17, 2009 Author Report Share Posted September 17, 2009 Da Box(from previous build, not built by me but i will need to modify it sum. O my, the entire trunk fell out "FRIENDS MAY COME AND GO BUT 200 POUNDS WILL ALWAYS BE 200 POUNDS." -System in progress- SYSTEM SHOULD BE DONE BY THIS MONDAY!!!!!! 15.2 Orion HCCA 4 Cubic ft tuned to low 30's MB Quart DSC1500.1D Kinetik HC1800 Kinetik HC800 50ft of KnuKonceptz 1/0 gauge 10ft Kicker 4 gauge "LET THE PAIN COME OVER YOU, BUT NEVER LET THE PAIN OVERCOME YOU." Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.