Ditched 12's, going 15

[OrionStang]

Im going with a single 15" nightshade. I need to build a box with at least 3 cubes. Problem (once again) is space. MAX dimensions can be H 12.5" W 34" D18". I need help building a box, mainly with port dimensions. I've tried the box calculator programs, but i'm stumped on port tuning. I would appreciate any help from experienced box builders. BTW, the sub will have to be top loaded. Would also consider triangular/wedge designs. I wish you all could see this trunk, not much smaller than previous generation, but many angles and slopes.

Edited September 29, 2009 by OrionStang

[AI James]

after sub displacement and port displacement and any bracing that would be needed you dont have the room for 3 net cubes

[Decaf]

closest i got is 2.8cuft w/ 2 4" aeroports 17" long tuned to 34.85hz.... 67hz tuning would make it 3cuft, lol

u need more room

[OrionStang]

I could attept an odd shaped multi sided box and do alot of experimenting, sounds like fun.

[FreelandKustomz]

i was twelves, went 15's going back to 12's

[OrionStang]

closest i got is 2.8cuft w/ 2 4" aeroports 17" long tuned to 34.85hz.... 67hz tuning would make it 3cuft, lol

67hz

u need more room

I know, terrible

[OrionStang]

i was twelves, went 15's going back to 12's

I may have to rethink the whole setup, new amp and find the right subs

[Decaf]

just do two nice 10s... then they only need 3cuft total

or 4 8s

Edited September 29, 2009 by Decaf

[StreetSlappah]

just do two nice 10s... then they only need 3cuft total

or 4 8s

x2

[fritosaregood]

I would go down to 2 10s, or a single 12. mustangs have trunks way to small for big subs, my neighbor fit 2 12s in with some cutting done though in an older mustang