Big Metts Posted October 9, 2009 Report Share Posted October 9, 2009 i'm bout too install 4 15" kicker cvr's dual 4ohms 1000w max 500rms i'd like to only have one amp to run them if thats possible and try not to break the bank if you got any suggestions i mean i'm asking you guys because i don't understand the ohms deal that well get back at me Quote Link to comment Share on other sites More sharing options...
melonhead Posted October 9, 2009 Report Share Posted October 9, 2009 This will help you. http://www.rockfordfosgate.com/rftech/woofer_wizard.asp Quote Link to comment Share on other sites More sharing options...
Marlo Stanfield Posted October 9, 2009 Report Share Posted October 9, 2009 (edited) Best way to wire it would be @ 2ohms on something like a Kicker ZX2500.1. Will send 625w or so per woofer, but the amp is a lil bit pricey. Or always could snag an Audiopipe 3000D and just adjust the gains accordingly to not overpower the subs with the full 3k. I believe it can be wired @ .5ohm also, if u just parallel the entire series of wiring(correct me if wrong i'm getting a lil bit too tired right now). Something like a Sundwon SAZ1500D or IA20.1 @ .5ohm would be perfect in that case. Do u have the extra electrical to back up at least 2k daily?? Edited October 9, 2009 by Marlo Stanfield Quote 1998 Ford Explorer Eddie Bauer... New setup, old ride... QX56 is staying stock til I get loud... It's only getting walled off if I don't meet my goal @ SBN. Pioneer AVIC-N2 (12) 12" RE SXs old model.... (3) AB VFL 500.1 @ 1ohm each Dual 300amp Ohio Gen alts.... (10) Northstar NSB-125s 26ft3 @ 33hz w/ a ton of port area 156.5 @ 40hz @ dash, Db Drag style / 153.2 Bassrace Link to comment Share on other sites More sharing options...
Boon Posted October 9, 2009 Report Share Posted October 9, 2009 (edited) 2 DAT 1000.1's Powering 2 ohm loads is always easier with 2 small amps rather than 1 big one IMO Otherwise Kicker 2500... Or a 2-in-1-box amp like a AP3000D Edited October 9, 2009 by Boon Quote 10.x volts fo' life! Link to comment Share on other sites More sharing options...
Big Metts Posted October 9, 2009 Author Report Share Posted October 9, 2009 you mean the battery power? for 2k and i can wire these 4 to a 2 ohm load capability? Quote Link to comment Share on other sites More sharing options...
Marlo Stanfield Posted October 9, 2009 Report Share Posted October 9, 2009 you mean the battery power? for 2k and i can wire these 4 to a 2 ohm load capability? Yea things like an HO alt, big 3, extra batts, etc.... Don't quote me exactly(a lil drunk and tired right now) but I'm 99% sure they can be wired to 8,4,2,.5ohm final loads. For 2k I'd suggest u at least have big 3, a nice underhood batt(ex. kinetik 1400 or so), and a big batt out back(Kinetik 2400, XS 3100, NSB90, etc). H/O alt isn't a necessity, but it would put alot of ease on the system as a whole. Quote 1998 Ford Explorer Eddie Bauer... New setup, old ride... QX56 is staying stock til I get loud... It's only getting walled off if I don't meet my goal @ SBN. Pioneer AVIC-N2 (12) 12" RE SXs old model.... (3) AB VFL 500.1 @ 1ohm each Dual 300amp Ohio Gen alts.... (10) Northstar NSB-125s 26ft3 @ 33hz w/ a ton of port area 156.5 @ 40hz @ dash, Db Drag style / 153.2 Bassrace Link to comment Share on other sites More sharing options...
Big Metts Posted October 9, 2009 Author Report Share Posted October 9, 2009 so i can run them on a 1000w kenwood with a 2ohm capability? if a wired it right until i got a upgrade Quote Link to comment Share on other sites More sharing options...
Marlo Stanfield Posted October 9, 2009 Report Share Posted October 9, 2009 so i can run them on a 1000w kenwood with a 2ohm capability? if a wired it right until i got a upgrade Yea you could, idk how much output you'll have with less than 250w per woofer. What amp exactly do u have?? I wouldn't suggest you buy a Kenwood amp if u don't already have one. Quote 1998 Ford Explorer Eddie Bauer... New setup, old ride... QX56 is staying stock til I get loud... It's only getting walled off if I don't meet my goal @ SBN. Pioneer AVIC-N2 (12) 12" RE SXs old model.... (3) AB VFL 500.1 @ 1ohm each Dual 300amp Ohio Gen alts.... (10) Northstar NSB-125s 26ft3 @ 33hz w/ a ton of port area 156.5 @ 40hz @ dash, Db Drag style / 153.2 Bassrace Link to comment Share on other sites More sharing options...
emperorjj1 Posted October 9, 2009 Report Share Posted October 9, 2009 400 bucks for 2 T10001bd's bd sync for a single load or master slave 2 per amp. Hit me up Quote J. JMy CardomainFINISHED COBALT SS/SC DUAL ALTERNATOR PICS theres no such thing as too expensive when it comes to upgrades like that, because imo if you are gonna spend to upgrade then do it correctly rather then be a cheap ass ricer Link to comment Share on other sites More sharing options...
Ben Building Posted October 9, 2009 Report Share Posted October 9, 2009 Have you checked out the American Bass VFL 100.1? Great amp. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.