a_steezy Posted October 21, 2009 Report Posted October 21, 2009 so i got my zx350.4 and determined i need a nice component set up front i was thinking and what is the final ohm load that a component set rests at? asking this because my current speakers are a 4 ohm which due to my amp does right at 72 watts but if i wire down to 2 ohms, i can push roughly 105watts is there a set of components that runs at 2 ohms that 105watts will feed? '98 Dodge Durango 5.9L 5% front windows, 2.5% on all backs Alpine CDA-9883 Kicker ZX350.4 Kicker KS650's in all doors Kicker 1/0 hyperflex
wL<3bass Posted October 21, 2009 Report Posted October 21, 2009 Infinity Kappa comps are 2ohm....there are others but most are above 100wrms Vehicle: 1997 S10 Blazer 4dr 4X4 Exterior: Rear End Bagged, Black Grill, Lifted 2" Amplifiers: Rockford Fosgate T8004 & T10001bd Batteries: 2 Stinger SPV35, Kinetik HC2400 Electrical: Big 3, DC Power 290amp Alternator w/ MLA at 15.5v Enclosure: 4.2 ft³ @ 33Hz 84sq.in. of port (20sq.in. per cube) Headunit: Eclipse CD3200 w/ 80G iPod Mids/Highs: Rockford T152s (a-pillars), Rockford T162s (doors) Subwoofers: 1 15" Fi BL Fully Loaded Wire: All 1/0g Kicker Hyperflex My YouTube Videos My Fiberglass A-Pillar Build My "Seamless" Looking Box Build My DD1508 T-Line Bandpass Build "Seamless" w/ Acrylic Windows (for '05 TrailBlazer) My Stealth 8" Fiberglass Build (for '05 TrailBlazer) My Build For A Friend's '08 Cobalt 15" BL Sealed Off From The Trunk My feedback/references...
n8ball2013 Posted October 21, 2009 Report Posted October 21, 2009 Image dynamics makes some as well THERE IS NO BUILD LOG! 1998 Chevy Silverado ext cab Alpine CDA-9887 4 Team Fi 15s 2 Ampere Audio TFE 8.0 2 Ampere Audio 150.4 3 Digital Designs CS6.5 component sets Dual Mechman 370XP Elite alternators inbound! 8 XS Power d3400 6 XS power d680 Second Skin Stinger Tsunami Wiring Sky High A Real Voltmeter not a piece of shit stinger.
a_steezy Posted October 21, 2009 Author Report Posted October 21, 2009 damn all those are waaay more money than i have now hah... what are some component sets that run good off 70-75 watts @ 4 ohms? i'm always starting to think i shoulda done more research and maybe looked into a more powerful amp for what i wanna do... possibly raffle this away and go with a sax-100.4 '98 Dodge Durango 5.9L 5% front windows, 2.5% on all backs Alpine CDA-9883 Kicker ZX350.4 Kicker KS650's in all doors Kicker 1/0 hyperflex
X2.H10.V4 Posted October 21, 2009 Report Posted October 21, 2009 There are several companies that make 2 ohm and 3 ohm components, off the top of my head... Infinity, JBL, Focal, RE Audio XXX, etc
Recommended Posts
Archived
This topic is now archived and is closed to further replies.