Cdizzle Posted May 5, 2007 Author Report Posted May 5, 2007 all those videos are set to private and we cannot view them. Alright, now try... Damn Thiefs
audiofanaticz Posted May 6, 2007 Report Posted May 6, 2007 You dont have your volt meter on the correct setting like someone else said. Try a different setting
KickerAudio21 Posted May 6, 2007 Report Posted May 6, 2007 you probably accidentally had it on the amperage setting, which shorted out the multimeter and that's why it's acting funny. ------------------------------------------------- 1st place circuit city car/spl show (maplewood,MN) 2006 146.6 dB's with 2 12" L7 and 1606d brutus
zaxfire69 Posted May 6, 2007 Report Posted May 6, 2007 (edited) set your multimeter on VDC 20..That will give you Volts Dc....At least that is what I set mine on...Vdc 20..That means it will measure up to 20 volts Dc Current... Edited May 6, 2007 by zaxfire69
Cdizzle Posted May 6, 2007 Author Report Posted May 6, 2007 I swear I have tried everything guys, the first time I had this, I accidentally put the positive post in the "unfused" area, and tested it out on my car batt to see how everything worked, well I popped the fuse and once I found that out I went a got a new fuse, the problem is after I put that new fuse it it kept blowing them I guess, when I put a new fuse in it has a "short" function when you can check to see if it is making a complete circuit, so i would test the old fuses and sure enough, they were popped... You think since It popped that first fuse, I might have messed up the meter? Damn Thiefs
Cdizzle Posted May 7, 2007 Author Report Posted May 7, 2007 Can you post a picture of your multimeter??? http://www.radioshack.com/product/index.js...rentPage=search Damn Thiefs
zaxfire69 Posted May 9, 2007 Report Posted May 9, 2007 That picture really doesn't do any good..Can't see the settings..
Cdizzle Posted May 15, 2007 Author Report Posted May 15, 2007 Well I posted those videos... I know tha tyou arent supposed to do this, but I was making sure the damn thing still worked... I put a wire connecting the posts of where the fuse goes, and when I do that then everything runs like normal. I took that wire out and put a fuse back in and I believe that it just keeps popping all my fuses that I put in... I am going to get another set, but if these pop like the otherones, then im taking the damn thing back... Damn Thiefs
zaxfire69 Posted May 15, 2007 Report Posted May 15, 2007 (edited) Can you just take a picture of the actual voltmeter with the settings...Your video's would work if your camera was Clearer.....If you can snap a pic of the voltmeter I can help..I just can't see the picture and the settings in any of the photos you have givin me...I also will try to find a better picture on the net while you do this... Tis is you right here right>... Here is your owners manual...Read!!!! It will tell you how to check Volts Dc.... http://rsk.imageg.net/graphics/uc/rsk/Supp...00811_PM_EN.pdf Your Welcome... Should be on Page 4 of that .Pdf file.... Edited May 15, 2007 by zaxfire69
Recommended Posts