Sanitarium Posted December 1, 2009 Report Posted December 1, 2009 Box Pictures on page 4 Box Installed on page 5 Video on page 6 New Video, page 8 Doors started, page 10 Doors finished, page 12 New pics and a video, page 12 Alright, About to start ordering parts to get this build underway. Here's the plan 2 Audioque HDC3 18's 2 Audioque 2200D's AGM Battery under the hood 1 Deka battery per amp DC power 270sp with MLA module Lots of 1/0 Knukoncepts wire2-28-09 10 cubes, 140 square inches of port tuned to 36 hz More pictures coming very soon.
ugpbmx Posted December 1, 2009 Report Posted December 1, 2009 hell yea, definitely watching this build MY TRUCK BUILD - 1976 F-100 Ranger. Fully built 482 big block, 4 DC lvl4 15's in a blowthrough, plenty of custom fabrication. MY HATCH BUILD - 1993 Honda Civic DX Hatchback . Clean daily driver, dropped, subtle customization.
iTech Posted December 1, 2009 Report Posted December 1, 2009 hell yea, definitely watching this build X2.. My Official Feedback Thread PSN - tech2332 Games for PS3: Killzone 2, BattleField: Bad Company 2! Add me to play either!
Decaf Posted December 1, 2009 Report Posted December 1, 2009 coppers? little overkill on bracing... use less and let the subs have more volume/more port brace above and below the port too mr big build... its good too see some more hdcs being used waits for moar pics
Sanitarium Posted December 1, 2009 Author Report Posted December 1, 2009 The truck. Bracing will be 1/2" birch Box Dimensions
BEllithorpe04 Posted December 1, 2009 Report Posted December 1, 2009 damn, watchin this fa sho 1997 Pontiac Bonneville Black on Black on Black 15" DC Sound Labs Level 5 w/ quad coil in a T-Line tuned to 35 hz 7" Jensen VM9311TS Touch Screen Flip Out w/ J-Link Blue Custom Trim Blue Custom Fiberglass Rear Speaker Pods Autotek Mean Machine MM2000.1 1/0 Knukonceptz KLMX Rockford Fosgate Twisted RCA's 2 Audiopipe Anl fuse holders w/ 200A Kicker fuses 2nd battery (Soon to be an Odyssey D3100) Dynamat Extreme Bulk Pack Custom False Floor 15% Tint All Around Custom Painted Stock Rims My Build Log Tailights 15" Lvl 5 DC T-Line Build
Sanitarium Posted December 1, 2009 Author Report Posted December 1, 2009 coppers?little overkill on bracing... use less and let the subs have more volume/more port waits for moar pics The bracing being only 1/2" thick and averaging 1" width, won't really take up much room at all . 10ths of a cube overall. the front "chamber" will have to be made of 1/2" birch due to the size of the speakers and the limitations of my bed height (19.5") I'll be bracing the front chamber with a second layer of the 1/2" birch everwhere speaker clearance isn't a problem, and fiberglassing it all together.
Decaf Posted December 1, 2009 Report Posted December 1, 2009 10-4 on the small width bracing... wise idea, its hard to tell on sketchup just make sure that port is tied to the walls near its entrance... thats gonna be a loud truck!!! whos gonna finish first? u or seth, lol
Sanitarium Posted December 1, 2009 Author Report Posted December 1, 2009 10-4 on the small width bracing... wise idea, its hard to tell on sketchupjust make sure that port is tied to the walls near its entrance... thats gonna be a loud truck!!! whos gonna finish first? u or seth, lol Thinkin 1" dowel pieces on top and bottom of the port to tie it in.. sound good? Seth is done minus speakers. times are hard.. especially when you "need" 4 18" speakers
brsteinbach Posted December 1, 2009 Report Posted December 1, 2009 Subscribed! I wanna see this. GL. 2 Infinity Reference 1252w 12s 4.2 cubic foot box tuned to 28hz Sub amp: 1 Profile AP1200 Speaker amp: 1 Sony Xplod XM-504z Kenwood eXcelon KDC-X492 4 and 8 Gauge Knu Big III In 1/0 All in my 90 Accord Diamonds are forever, but 9's end that shit fast....
Recommended Posts
Archived
This topic is now archived and is closed to further replies.