az73 Posted December 8, 2009 Report Share Posted December 8, 2009 here is an overall pic of stereo here is pic of tape/eq pic of it out. the problem is : #1. there is not a plug . its hard wired . to where i dont know. common sense says to the main part of the head unit but when i remove the dash face plate and try the main unit only comes foreword about 2 inches. so i cant see/feel to unplug it. #2. do i have to remove both main and tape/eq? "gotz1lung" in his build only removed the tape/eq part. i pmed him but received no response. 1992chevyk1500 found the harness and face plate for me(thank you)but am having a hell of a time gettin this figured out. thanks for any/all help matthew Quote sony m60ui polk mid/hi's infinity 6000m on tower fosgate p3d212 x2 fosgate p400-4 fosgate t1000-1bd im ona boat bitch My boat build funny thing is...............slamming fireworks in to the ground with a sledge hammer in mexico is like car audio in california... everyone is doing it but most fail Every time I read a comment you post, or a topic you make... I cannot help to think of how much of a badass you are!! Link to comment Share on other sites More sharing options...
jbondox Posted December 8, 2009 Report Share Posted December 8, 2009 (edited) here is an overall pic of stereo here is pic of tape/eq pic of it out. the problem is : #1. there is not a plug . its hard wired . to where i dont know. common sense says to the main part of the head unit but when i remove the dash face plate and try the main unit only comes foreword about 2 inches. so i cant see/feel to unplug it. #2. do i have to remove both main and tape/eq? "gotz1lung" in his build only removed the tape/eq part. i pmed him but received no response. 1992chevyk1500 found the harness and face plate for me(thank you)but am having a hell of a time gettin this figured out. thanks for any/all help matthew above the gas pedal the brain is there. I believe it is a single 7 mm holding it up... but it has been a long while Edited December 8, 2009 by North Olmsted Performance Quote SMD SuperSeller VerifiedJbondoXJames Shields Link to comment Share on other sites More sharing options...
az73 Posted December 8, 2009 Author Report Share Posted December 8, 2009 (edited) ok found it . turned stereo on and unplugged both jacks and radio was still playin(hahaha) but all lights went out/memory was gone. so do i unplug them there and just remove them from the dash? then use harness to get to stock speakers? :unknw:power/ground Edited December 8, 2009 by az73 Quote sony m60ui polk mid/hi's infinity 6000m on tower fosgate p3d212 x2 fosgate p400-4 fosgate t1000-1bd im ona boat bitch My boat build funny thing is...............slamming fireworks in to the ground with a sledge hammer in mexico is like car audio in california... everyone is doing it but most fail Every time I read a comment you post, or a topic you make... I cannot help to think of how much of a badass you are!! Link to comment Share on other sites More sharing options...
jp-kustomz Posted December 8, 2009 Report Share Posted December 8, 2009 if you go to the12volt.com they have a wiring diagram section for the vehicles it has pretty much everything u would need to know about it.. Quote 95 Delta 88 10 inch fubar(2 MB Quart RWE-352 15" on way soon) 1500.1 crunch kenwood KDC-MP642U Jp Kustomz Link to comment Share on other sites More sharing options...
baggedon4s Posted December 9, 2009 Report Share Posted December 9, 2009 (edited) They are a bit of a pita. All the plugs you need are on the "brain" above the gas pedel. You un hook them, plug them into a metra 70-1858, then pull the wires back up to where the aftermarket h/u installs. then wire the h/u plug to the 70-1858 in the dash, not out out the truck like I normally do, because once you pull the plugs over the dash support bar, it gets a bit tight putting everything back in. so I leave them under it. youll have a plug that is unused, its the one that runs up to the radio tunner in the bezel Edited December 9, 2009 by baggedon4s Quote 99 suburban, ranger rover headlights, SS front bumper,roll pan with frenched tag, 2nd row delete,glassed dash..audio to come whenever I figure out what I want. Link to comment Share on other sites More sharing options...
TritonBoulder47 Posted December 10, 2009 Report Share Posted December 10, 2009 here is an overall pic of stereo here is pic of tape/eq pic of it out. the problem is : #1. there is not a plug . its hard wired . to where i dont know. common sense says to the main part of the head unit but when i remove the dash face plate and try the main unit only comes foreword about 2 inches. so i cant see/feel to unplug it. #2. do i have to remove both main and tape/eq? "gotz1lung" in his build only removed the tape/eq part. i pmed him but received no response. 1992chevyk1500 found the harness and face plate for me(thank you)but am having a hell of a time gettin this figured out. thanks for any/all help matthew When I did my 91 Chevy, I pulled them both but didn't have to cut the wires off the EQ... There were plugs there. When you install your aftermarket HU it will go where the EQ was. I actually think I still have one of those install pieces somethere... Also when I did my 91, Crutchfield sent me a pocket that goes where the stock HU went... It was a PITA but well worth it... Quote 2011 Dodge Durango Citadel AWD HEMI - LOADED Stereo: STOCK Emergency Equipment: Morotola - Federal Signal - Feniex - Gamber Johnson Performance: MOPAR Performance - Diablo 911 Calltaker / Diaptcher, Volunteer Ambulance Driver, Rescue Tech, Fire Fighter, Fire Policeman, Emergency Equipment Installer / Repairman Link to comment Share on other sites More sharing options...
az73 Posted December 11, 2009 Author Report Share Posted December 11, 2009 thanks guys appreciate all the info matthew Quote sony m60ui polk mid/hi's infinity 6000m on tower fosgate p3d212 x2 fosgate p400-4 fosgate t1000-1bd im ona boat bitch My boat build funny thing is...............slamming fireworks in to the ground with a sledge hammer in mexico is like car audio in california... everyone is doing it but most fail Every time I read a comment you post, or a topic you make... I cannot help to think of how much of a badass you are!! Link to comment Share on other sites More sharing options...
Guest Posted December 11, 2009 Report Share Posted December 11, 2009 wtf is up with your sticker man? lmao Quote Link to comment Share on other sites More sharing options...
Shyne151 Posted December 11, 2009 Report Share Posted December 11, 2009 Holy shit that brings back memories of when I first started installing... I remember the guy that was training me said "well i'm gonna let you just give this one a whirl and see how long it takes you to figure it out"... being a cocky teenager i was like "got it!"... hahah took me like a half hour to figure out the brain was down by the gas pedal. Quote -Installer for Duke's Car Stereo 2000 Pontiac Grand Prix - Ported Eaton M90 S/C, 3.5" pulley, XS Power Headers, 1.9 Rockers, FWI, Poly Motor Mounts, Custom Tune. RF T1000-1bdCP and T400-4 Boston Acoustics SPG 555 Kenwood eXcelon 995 RF Punch 6.5" components and MB Quart Premium 6x9"s Powermaster Alternator, YellowTop D34, Vmax CT1000 Link to comment Share on other sites More sharing options...
az73 Posted December 11, 2009 Author Report Share Posted December 11, 2009 i love that button....it was my best friends.he shot himself a couple of yrs ago and it just reminds me of him. its in my work truck and we both have the same businesses. shit ive tried for hours but cant even get to the back of the main unit to see if theres a plug. the tape deck part is hard wired so when i tried to follow those wires they just disappear into the loom somewhere. since its my work truck i didnt want F anything up. :01nocomment8so: Quote sony m60ui polk mid/hi's infinity 6000m on tower fosgate p3d212 x2 fosgate p400-4 fosgate t1000-1bd im ona boat bitch My boat build funny thing is...............slamming fireworks in to the ground with a sledge hammer in mexico is like car audio in california... everyone is doing it but most fail Every time I read a comment you post, or a topic you make... I cannot help to think of how much of a badass you are!! Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.