Subwoofer box idea that I've come up with for my car.

[cthedinger]

I would do at least 3 6" aero ports maybe 4 6" ones

[mikeg321]

With 6 cubic feet net vol. 3 4" aero ports gives you 6.28sq inches per cu ft. 2 6" aeros would give you 9.42sq inches per cu ft.

[skittlesRgood]

three 6" ports will give 14sq in per cube so four will be way too much.

if you can fit two 4" ports in the middle where you wanted the 6" then 1 in each corner like you have it, that would be good. assuming you stick with 6cubes itll give you 8sq in.

[skittlesRgood]

With 6 cubic feet net vol. 3 4" aero ports gives you 6.28sq inches per cu ft. 2 6" aeros would give you 9.42sq inches per cu ft.

but can he fit two 6" ports?

[cthedinger]

three 6" ports will give 14sq in per cube so four will be way too much.

if you can fit two 4" ports in the middle where you wanted the 6" then 1 in each corner like you have it, that would be good. assuming you stick with 6cubes itll give you 8sq in.

Well i personally like closer to 18-20 sq in of port.

[mikeg321]

but can he fit two 6" ports?

Looking at the drawing again, doesn't look like it. Unless he could do subs up port back

[mikeg321]

A 6" in the middle and a 4" in the cornners would give you 8.9sq inches per cu ft. But I dont know if mixing different size ports is a good idea.

[Dmo]

I think this is my favorite so far. I like how symmetrical everything is.

[mikeg321]

^^^^ looks good!

Edited May 5, 2010 by mikeg321

[Boon]

Split the box down the middle with a divider and run 2 6" aeros in the middle. IMO. If you can fit it.